This can be a Authentic made within the USA Easy Wood Tools Ci2-SQ sq. Carbide cutter designed to suit the Mid, Mini and Easy Begin Easy Wood Roughers. Watch out for low cost imitations of Easy Wood Tools carbide cutters. Authentic EWT cutters have the optimum 3G’s of Carbide – Grade, Grind, and Geometry. 1) The Proper Grade: Carbide is principally a mix of tungsten powder and cobalt that’s fused collectively beneath excessive strain and warmth. The ratio of cobalt to tungsten and the dimensions of the tungsten particle are referred to collectively because the ‘grade’. There are actually tons of of hundreds of conceivable grades and no ‘one grade’ of carbide is suited for all purposes – whether or not wood slicing or metallic chopping. The right mixture of cobalt and grain measurement in EWT Carbide cutters yields a leading edge that’s each the keenest and probably the most sturdy grade for woodturning out there immediately. 2) The Proper Grind: EWT grinds all of their cutters on tremendous inflexible CNC grinders to stop micro chipping of the slicing edges. EWT makes use of the right grit diamond wheels to supply the flattest, truest surfaces attainable with minimal grinding scratches left on the floor. All of the cutter surfaces are floor within the optimum sequence to deliver the sting into keenness in the course of the final course of, or as soon as once more micro chipping of the chopping edges will happen if the right sequence just isn’t adopted. three) The Proper Geometry: EWT grinds all their cutters to the right angles and geometries particularly for woodturning. This produces an edge that cuts each cleanly and safely for all talent ranges. Solely when grade, grind, and geometry are in concord will you’ve a leading edge for excessive efficiency woodturning. Comes with alternative four-forty countersink machine screw.Authentic Easy Wood Tools one hundred% manufactured within the USA by the chief in carbide insert lathe woodturnings know-how
Ci2-SQ cutter designed to suit Easy Begin, Mini and Mid measurement roughers; .430″ x .070″; four-forty screw.
The right grade of carbide produces one of the best mixture of sharpness and sturdiness
Optimum grinding course of produces the flattest and truest slicing surfaces
The suitable geometry or slicing angle is floor to the produce an edge the cuts cleanly and safely.
This post first appeared on Woodworking Made Easy - Tips, Projects, Plans And Video, please read the originial post: here