Get Even More Visitors To Your Blog, Upgrade To A Business Listing >>

How To Start Lure Fishing

Fishing Lures

There are many ways to Lure in fish to your boat. In addition, knowing when to “chum” as oppose to “lure” can be equally challenging when you are ready to catch the most fish that you can.

Lures are used the majority of the time
, but if you are dealing with fish who heavily use their sense of smell, lures may be a waste of time. As a general rule of thumb, chum is used in order to bring fish to the boat and lures are generally used for spot Fishing.

When you decide to use a lure, what type do you choose? There are many different kinds of lures and they are used in different regions for a variety of purposes. If you learn the basics then you will not have to look like a novice by reading the back of the package while perusing the aisles in the stores.

A lure is defined as an object, often designed to resemble a fish’s prey,
and they usually come equipped with one or more hooks that are used to catch fish. You will attach a lure to the end of your fishing line and throw it out into the water until a fish takes a bite. The one exception to the rule is the fly lure, which is used to float on the water’s surface mimicking the movement of an insect. You can also troll lure behind a boat to create the appearance of a living animal in the water. Some of the different types of lures are classified as jigs, wobblers, spinner, spoon lures, plugs, fly lures, and worms.

Jigs are made of weighted metal heads and a tail that is made from animal hair, soft plastic, feathers, or rubber. A minnow can sometimes to be added or a piece of meat can be attached to the end of the hook. Jigs can be used for almost any kind of saltwater or freshwater fishing.

A spoon is a metal lure that looks similar to a bait fish. These lures are meant to be cast or to be trolled behind a moving vessel. The plastic belts are the most commonly thought of baits. They are the plastic worms that are sometimes scented in order to attract more fish. The plastic belts can be used with or without a weight, but a jig head, spinner, or a spinner bait always accompanies them.

are made from plastic or wood and can be used on top of the water. There is a separate category of plugs called diving plugs that are designed to plunge into a certain depth of the water.

The spinners have blades that spin around a wire shaft, and they are made of plastic or animal hair. The spinner baits are the lures with more than one blade that spin around a safety shaft. They are characterized by ‘skirts’, which are made of animal hair, vinyl, rubber, and other materials.

Last are the flies and poppers. These baits are primarily used for panfish, trout, and bass. Fly-tying is a harder concept to learn, making these lures unique.

Lures are tested and decided upon by the individual. Many lures are determined to be useful by trying them out time and time again. When you become comfortable with a certain type of lure, you will be able to expand on its possibilities, making it more individualized for your fishing purposes.

How to make a fishing lure

Making fishing bait that work well enough to capture the same big fish your costly brand name lure does is actually rather simple, and fun too.

To make a lure needs no special tools, and all the different parts you require for lure making are easily obtainable from on-line reduction sellers like eBay and Amazon. These on-line stores even have books available which get into significantly more detail on the way to make fishing bait. The initial step in making your home made fishing lure is to determine what kind of lure you’re going to make. This sub shaped lure is clear-cut, small, and simple to form, even with a typical pocket knife.

Using one of you have lures as a model, or a picture from the fishing lure book might help make sure overall contour, and hook arrangements correct. Given that you’ve chosen what kind of lure your going to make, its time to select your wood. You will need a bit of wood about 4 inches long and 1\/2 inches square. Its normally water resistant and holds eye hooks good. It is possible to just as readily get a block of wood from the local lumberyard or equipment store. Little blocks of wood called blanks will also be available at hobby stores.

Another step to make a lure is to rough contour the piece of wood. If you own a little jig saw you can knock out this measure pretty quickly. If not, a good knife hobby, wood carvers knife, or a sharp pocket knife may be used for this step. At this stage you’re just trying to take off the sharp corners, and work the wood into the sub form. Once you’ve your basic shape, start sanding the wood out with a few heavy sandpaper. Progress throughout the various grits to achieve a smooth finish. Attempt to get the lure as symmetrical appeal can, but don not worry if it’s a little lopsided.

Occasionally the lures that are a bit lopsided attract more fish. Check a lure comparable to the one you’re making to determine where to your home the eye screws. Utilize perhaps a pair of needle nose pliers to turn in the eye screws. To set up the lip or bill, again utilize your model to establish approximate location. Utilize a tiny coping saw or rotary bit on perhaps a Dremel to form your bill.


Many of the lures seen on this website can be found on Amazon and ebay.

This post first appeared on How To Saltwater Fish, please read the originial post: here

Share the post

How To Start Lure Fishing


Subscribe to How To Saltwater Fish

Get updates delivered right to your inbox!

Thank you for your subscription