For persons who cannot enroll for class-based taught courses in occupational health and safety based on some personal reasons, the online base training (bachelor’s degree in occupation… Read More

NFPA diamond (National Fire Protection Association) is a standard system used for the identification of the hazards of materials for emergency response. It is used mainly by emergency person… Read More

Flash Point is the lowest temperature at which vapor of a volatile combustible substance can ignite in the air in the presence of an ignitable source. At flash point, more vapor may not be p… Read More

In this article, we will be looking into a very popular safety quote “Safety First”. This quote cannot be omitted in any organization that is practicing safety; be it well-practi… Read More

The fire blanket is a fire fighting equipment used to combat fire in its early stage (Incipient fire). It is made of a fire retardant material; wool, fiberglass, and sometimes kevlar, and ca… Read More

Standard Operating Procedures (SOP) could be said to be a set of step-by-step instructions compiled by an organization to guide workers on how routine operations should be carried out. It he… Read More

Fire Extinguisher Inspection is important to ensure that the extinguishers are active and ready for operation. Fire Extinguisher Inspection Legal Obligation Federal OSHA standard 1910.1… Read More

Material safety data sheet (MSDS) is a document that provides information about a controlled product that meets the hazard criteria defined in the Controlled Products Regulations and how to… Read More

OSHA Certification Online makes it easy and flexible to get trained in any OSHA course of interest. You can acquire any OSHA certification Online after being trained in any of the OSHA cours… Read More

There are different fire extinguisher classes grouped based on the type of fire they extinguished; this is what we will be considering in this blog post. Understanding the fire extinguisher… Read More

Have you for any reason considered this – “What is the minimum/maximum temperature in the workplace?” This short article as extracted from the Health and Safety Executive w… Read More

The yield sign is a regulatory sign which simply means let other road users go first. In road transport, a Yield or Give Way sign indicates that emerging d… Read More

Prescription Safety Glasses are glasses that have been made specifically to match the wearer’s defects of vision. They are worn in place of an individual’s regular glasses at tim… Read More

Health and safety stairs regulations have been necessary due to numerous accidents that have been recorded on stairways. This article will cover Health and safety stairs regulations by OSHA… Read More

IOSH founded in 1945 is the only Chartered body for health and safety practitioners and the world’s largest health and safety professional membership organization. IOSH is the first Eu… Read More

In the article “Risk Assessment Example “, we will see typical risk assessment for different working areas as designed by The Health and Safety Executives. Risk assessment is a r… Read More

Fire load is the available flammable materials in a given area. According to United States law, it is a number measured in kilograms per square meter which represents the maximum amount of c… Read More

Most of us only have shallow knowledge about injury; in this blog post, we will give in-depth information surrounding the topic – What is Injury? In the U.S., millions of people injure… Read More

The riser room sign helps you identify a riser room even when you do not enter the room. As we know, the riser room is the room or designated space where the control room of the fire sprinkl… Read More

Foam fire extinguishers are one of the most common types of fire extinguishers and are generally used for fires involving flammable solids and liquids. Foam fire extinguishers create a cooli… Read More

Violence in the Workplace or occupational violence refers to violence, usually in the form of physical abuse or threat, that creates a risk to the health and sa… Read More

TRIR Calculation gives insight into your company’s past safety performance, it is a must-know for Safety professionals. TRIR means – Total Recordable Incident Rate. It is a laggi… Read More

OSHA 30 is one of OSHA’s outreach programs. It is divided into two (2): 30-Hour Training for Construction 30-Hour Training for General Industry 30-Hour Training for Construction The OS… Read More

The Management of Health and Safety at Work Regulations 1999 is the regulation that places a duty on employers to assess and manage risks to their employees and others arising from work acti… Read More

Loss prevention in safety terms covers all actions taken to prevent loss that could arise from an accident. It is the name given to the activities that help provide anticipatory safety… Read More

Attaining a GRAD-IOSH Membership is a great level of achievement desired by many who want to reach the peak of their career in Occupational Health and Safety. IOSH meaning Institute of Occup… Read More

If you are planning to enroll for the NEBOSH IDip in Occupational Health and Safety, then you may be asking How Much Is NEBOSH International Diploma? NOTE: There is no fixed cost for th… Read More

NEBOSH command words are instructional, operational, or task words. It explains the approach that should be used in attempting the different questions; it helps understand the depth of the a… Read More

When the scissor lift is not used properly, it can present serious hazards to workers. However, the best and most reliable option to prevent accidents when using the equipment is to follow t… Read More

The manual handling poster contains important tips on safe manual handling procedures. Manual Handling Poster Manual handling is an integral part of our day-to-day activities on our job site… Read More

MEWP rescue plan represents the Mobile Elevated Working Platform (MEWP) rescue plan. Most equipment is built with in-built safety measures to ensure the safety in the use of the equipment as… Read More

If you looking to achieve CMIOSH status and further your safety career, this article is for you. This article contains a table that compares the two main routes – The NEBOSH Natio… Read More

Physical activities are an essential part of an active lifestyle for students. Schools play a vital role in helping students participate in these physical activities. That’s why every… Read More

In this article, we will be discussing – “What Are The Deadliest Excavation Hazards You Need To Know?”. At the end of this article, you will understand these hazards and ho… Read More

Point of operation safeguarding requirements are requirements necessary to ensure the safety of workers and employees while using power tools. Safeguards such as ROPS and FOPS are designed t… Read More

If you are unfamiliar with the term confined space, you are not alone. Confined spaces often go by different names, depending on the industry and location, such as storage tanks, dumpsters… Read More

Here are 7 common examples of biological hazards in food that are not well known to the general public but can potentially cause serious illness or even death. Fortunately, these hazards can… Read More

Try these 7 Control Measures For Noise Pollution In The Workplace and improve employee health and happiness. The Causes of Noise Pollution in the Workplace, whether it is from an office… Read More

The Department of Labor’s Occupational Safety and Health Administration (OSHA) has set certain standards for various industries to ensure that workers can operate machinery safely. The… Read More

I hear people ask – How much does an Occupational Health and Safety Professional earn. It is an important question though, after all, money is a motivation factor; more money more moti… Read More

PAT testing also known as portable appliance testing is the name of a process in the United Kingdom, the Republic of Ireland, New Zealand, and Australia by which electrical appliances are ro… Read More

Working at height is a high-risk job that exposes the workers to a series of dangers, these dangers include mostly falling from height and falling objects. These two (2) hazards of working a… Read More

Employee’s Responsibilities for Health and Safety at Work Act 1974 is the area of the act that stipulates employees’ duty to health and safety. The Health and Safety at Work Act… Read More

Before I talk about the Licensed Safety Professional Certification. Let us have an overview of what qualifies someone as a Certified Safety Professional. A Certified Safety Professional is a… Read More

OSHA recordable incident rate is expressed as – The total number of recordable illnesses and injuries per 100 full-time employees in a year. The word recordable is used because not all… Read More

This article aims to give a breakdown of all NEBOSH courses; and qualifications awarded by NEBOSH (National Examination Board on Occupational Safety and Health) Before I list all the NEBOSH… Read More

Safety Management is a system adopted for managing Health and Safety issues in our workplaces; it can also be referred to as Health Safety and Environment Management System (HSE-MS). It cont… Read More

The behavior based safety process helps to identify work groups that may be at risk of accident or injury due to an unsafe work environment, unsafe work practices, or psychological factors o… Read More

If you’re in charge of keeping your employees safe and healthy at work, you know that this task isn’t always easy. However, there are tons of ways to improve health and safe… Read More

Physical activity can be one of the most rewarding experiences in life. It offers numerous benefits to your physical and mental health, as well as your social relationships with others. Rese… Read More

According to the Health and Safety Authority, Local Exhaust ventilation (LEV) is an engineering system designed to reduce employee exposure to airborne contaminants (dust, mist, fume, vapor… Read More

There have been several angle grinder accidents reported in our various workplaces. These angle grinder accidents range from minor to severe; some resulting in fatality. The good news is tha… Read More

This article aims to highlight all OSHA courses. Follow up to see all courses and accredited trainers close to you. OSHA Courses OSHA courses are generally divided into two (2) categories: O… Read More

There is no fixed price for gas safety checks and certificates; the cost simply depends on the gas-safe engineer you choose. Gas Safety Certificate Cost Gas Safety Certificate Cost can start… Read More

There are common fire hazards in the workplace that if not properly managed could result in serious fire accidents. In the UK each year there are around 25,000 non-residential fires reported… Read More

Housekeeping entails general care, cleanliness, orderliness, and maintenance.  It is a crucial aspect of workplace safety as good housecleaning helps prevent accidents and also red… Read More

HSE certification refers to the legally required Health and Safety procedures and management systems to ensure the health and safety of workers, contractors, visitors, and the general public… Read More

The hierarchy of control is a system used in industry to eliminate or reduce exposure to risk in the workplace as hazard/Risk control is important in protecting workers in the workplace. The… Read More

A fire safety plan helps to ensure the effective utilization of life safety features in a building/workplace to protect people from fire. It prevents the occurrence of fire by the control of… Read More

The word “Safety Share” is used to qualify the act of sharing safety information to enhance safety awareness and prevent accidents. Safety Share could be done in a formal meeting… Read More

An ergonomic hazard is a typical risk factor within the environment that has the potential to hurt the musculoskeletal system. According to Wikipedia, Ergonomic hazards are physical conditio… Read More

The question “What are the qualifications required for a safety officer” is very important for young and prospective Health and Safety professionals to ask. I want to become a Sa… Read More

Fire is the rapid oxidation of a material in the exothermic chemical process of combustion, releasing heat, light, and various reaction products. Fire is grouped into classes based on the so… Read More

The question “How long does it take for a DOL OSHA 10/30-Hour card to expire“ is an important question that is always asked by persons who are interested or involved in the… Read More

WHMIS Symbols are symbols representing the different hazard categories in the Canadian standard (WHMIS 2015 regulation) used in the classification and labeling of chemicals. What is WHMIS WH… Read More

Do you know the major players in the health and safety profession? If not, in the next few minutes I will educate you on the major health and safety organizations you could join. These healt… Read More

The STOP program in HSE is a behavioral-based safety program designed to prevent injuries and occupational illnesses in the workplace. “STOP” in the STOP program means – Sa… Read More

Using a safe working platform is a requirement when working at height. Since work at height comes with high risk, a safe working platform should be considered to carry out all height jobs sa… Read More

Health and safety are important in a fitness environment, the same way health and safety are important in every other environment. A fitness environment is a training facility, i.e., persona… Read More

In this article, we will be highlighting TOP HEALTH AND SAFETY INSTITUTES IN the UK, USA, India, and NIGERIA. This is to present to you good Health and Safety Training Institutes you ca… Read More

Grease fires are fires that are caused by overheating of grease; i.e., when the grease is too hot. There are generally two (2) types of grease, lubricating grease which is mostly found in th… Read More

I came across this question – What is the life expectancy of a welder, I got so interested in it. Why? Welding is a beautiful profession and we have lots of people in that profession b… Read More

This is a direct question and I will give a direct answer before some supplementary information follows. Question: In Order to Safely Climb a Ladder a Firefighter Should? The firefighter nee… Read More

Conveyor belt hazards are hazards associated with the use of the conveyor belt. Recall that a conveyor belt is a belt that has been looped and is wound around one or more pulleys for dr… Read More

Do you know that a handrail plays a very significant role in keeping you safe while working at an elevated point, on an elevated platform, or while ascending a staircase? So if ask – H… Read More

When answering the question “Which of the following are ignition sources“, you must first understand what ignition sources are. What are Ignition Sources Ignition sources compris… Read More

When we talk about excavation myth, we are referring to a widely held but false belief or idea about excavations. From the question – Which of the following is not an Excavation Myth?… Read More

Does PPE represent something different in the medical sector? This is where the question, “What does PPE stand for in medical terms” comes from. PPE represents the same thing no… Read More

Food Safety and Standards Act, 2006 is an integrated food law that lays down standards and guidelines for consumer safety, protection of consumer health, and regulation of the food sector. T… Read More

Are you thinking about the top food safety certifications to enroll in? Are you planning to enroll for food safety certification? or Are you planning to develop a career in food safety? If y… Read More

In this article, we will be focusing on “Psychological Hazard Examples“. A psychological hazard as defined by the Psych Wiki is an event that causes stress, damage, or distress t… Read More

Top management commitment towards Occupational Health and Safety implies – The direct participation of the highest level of management in all aspects of Occupational Health and Safety… Read More

Safety Integrity Level abbreviated as “SIL” is one of the safety studies carried out to prevent hazards in process industries. According to Wikipedia, a safety integrity level&nb&hell…Read More

Oxy-acetylene welding/cutting is also called Oxy-fuel welding/cutting. It is a process that uses oxygen and fuel gases to weld and cut steel or metallic components. In this type of weld… Read More

What is the important difference between OSHA and NEBOSH in Oil and Gas or Mining safety? There is no sector-specific difference between OSHA and NEBOSH. Be it oil and Gas, Mining, construct… Read More

Heat exhaustion recovery time is the time required for someone affected by heat exhaustion to recover from the illness. The heat exhaustion recovery time varies based on some factors: Time o… Read More

HAZOP study was initially developed in the 1960s to analyze major chemical process systems but has since been extended to other areas, including mining operations and other types of process… Read More

There have been questions on “The Effect of welding radiation (UVR) on the eye and skin“? There are different forms of radiation, like visible light, infrared, and ultraviolet ra… Read More

A safety checklist is a pre-organized document used during safety inspections/Audits for the identification of potential hazards in specific work areas, job processes, etc. It could be paper… Read More

Accident Investigation Process comprises of all the steps taken to arrive at the root cause of very accident. It is not suppose to be done haphazardly nor blindly; instead it should follow a… Read More

Do you know Who is Responsible for Providing SDS (Safety Data Sheet)? If you don’t, stay glued to this blog post to find out. SDS (Safety Data Sheet) formally known as MSDS (Material S… Read More

Drivers Need a Space Management System Because it helps them understand their current situation on the road and guide their decision making; it is crucial for safe driving. Space management… Read More

PPE (Personal Protective Equipment) safeguards users against hazards or physical harms they may encounter at the workplace. It is mostly known as “The Last Line of Defense“, that… Read More

Do you know when is an Asbestos Survey Needed? A very short and direct answer is that Asbestos survey is needed when: When is an Asbestos Survey Needed When the premises, or a section of it… Read More

The primary risk of Unstable or Overloaded Shelve is the risk of collapse of the shelve. This collapse could lead to damage of the shelve and/or damage to an individual or group of individua… Read More

When we talk about hearing protection, we are considering the entirety of all the measures necessary to keep our hearing faculty safe. However, there has been some false claims about hearing… Read More

Nail polish could mistakenly get into your eyes while using it or working with it, as a safety measure you should know the initial steps to take to protect your eyes. What You Should Do If N… Read More

Risk assessment for cleaning of LEV fans involves painstaking and step by step approaches to ensuring that the process of cleaning of LEV fans is achieved safely; It is a systematic process… Read More

The fight against fraud has taken on critical importance for individuals and corporations alike. The methods used by fraudsters are evolving along with technology. And this evolution only ma… Read More

Every business aims at making profit while looking at sustainability, unfortunately the greatest enemy of profit making and sustainability in business is Risk. This is why every business alw… Read More