For these Cartridges we recommend injecting the following amount of black ink:

PG-545/8287B001: 8ml
PG-545XL/8286B001: 15ml

The fill holes of these cartridges are very small and you will have trouble getting a regular syringe to fit. I recommend using the tool provided with many refill kits, a 2mm drill bit or a square shafted awl to widen it.

We recommend sticking to the lower fill for the PG-545 as these cartridges have a smaller sponge and are physically restricted inside the cartridge. As such over filling them can result in ink spilling inside your printer.

Once this cartridge has been refilled your printer will retain the same ink level estimate it has previously. These cartridges have no way of knowing that they now contain fresh ink and only estimate ink levels based upon how much printing had been done previously. Eventually your printer will believe that the cartridge is completely empty and prevent you from printing until a small prompt has been given. More information on this topic can be found here.

This guide is intended purely to show where to inject the ink into these cartridges and how much we recommend using. For full refill instructions for these cartridges please click here.

Canon PG-545 Video Refill Guide

Canon PG-545XL Video Refill Guide

Compatability

These cartridges fit a variety of Canon printers including the Canon Pixma iP2850, MG2450, MG2550, MG2550S, MG2555, MG2555S, MG2950, MG3050, MG3051, MG3053 and MX495 inkjet printers.

Any further questions or comments please let us know below.

The post Refilling Canon PG-545 & PG-545XL Black Ink Cartridges appeared first on Printer, Hardware and Software Help and Advice - Igloo.