The Gen Kit By Vaporesso Previewed

The Vaporesso Gen Kit includes the Vaporesso Skrr-S tank and the new Gen Mod.

You can also buy either of these on their own.

The Skrr-S tank has two formats a larger standard format and a smaller mini format. I thought the Mini was in order to meet the TPD regulations however the standard version also comes in a 2ml variant so I think it is just down to personal preference?

The tank uses the QF coils which are also used in the original Skrr tank and the Luxe Nano Kit. You get the QF Mesh and QF strip coils in the kit.

Also apparently this is compatible with the existing huge range of GT coil heads too!

The tank also has bottom adjustable airflow and a top fill cap.

Moving on to the Gen mod – this looks a pretty standard sort of box mod.

The maximum output is 200W and you will need 2×18650 batteries which are not included.

Sadly Vaporesso do not really mention what power modes you have – I have seen a mention of a “Pulse Mode” which pulses the power output to give it a boost every 0.02 seconds.

Aha I have just seen this – you need to go to a different page to find out the specs of the new AXON chipset. It says you get Variable Wattage, Variable Voltage, Temperature Control, Custom Curves, ECO and Bypass modes!

Also there is a Smart TC mode which detects a temperature control compatible coil and sets the temperature automatically.

The mod has a soft touch finish and a 0.91in OLED screen.

There are 4 colours of kit to choose from – Black/Red, Silver, Black/Blue and Black.

Kit Includes

• Vaporesso Gen Mod
• Vaporesso Skrr-S tank (or Mini version)
• QF Meshed coil – 0.2ohm (installed)
• QF Strip coil – 0.15ohm
• O-rings (standard kit only)
• USB Cable
• User manual

Vaporesso Gen Mod Specs

• Size: 93.5x27x53mm
• Output: 5-200W
• Battery: 2×18650 (not included)
• Modes: Pulse mode, TC, CC, VV, VW, Bypass, ECO, Smart TC
• Resistance range: 0.03-5ohm
• AXON chipset
• Display: 0.91in OLED
• Soft touch casing

Vaporesso SKRR-S Tank Specs

• Size: 26×55.9mm (Standard version), 23×49.5mm (Mini version)
• E-liquid capacity: 8ml / 2ml (Standard version), 3.5ml / 2ml (Mini version)
• Adjustable bottom airflow
• Top fill
• Coils: QF range
• Spitback shield

This looks a nice solid kit and the new chipset does give plenty of options!

Would you buy the Vaporesso Gen Kit? Let me know in the comments below!

The post Vaporesso Gen Kit Preview – Skrr-y Generation? appeared first on Ecigclick.