New Magpul PRS Gen 3 Rifle Stock

The PRS Gen 3 is designed to enhance the long-range shooting experience.

The Prs Gen 3 is designed to enhance the long-range shooting experience.

Magpul continues to produce new and enhanced products in fever pitch, and the introduction of the Generation 3 Precision Rifle/Sniper (PRS) stock is just one of those additions. The PRS Gen 3 maintains the integrity of previous PRS models while looking to enhance some of the finer features to create and even more enjoyable and functional shooting experience.

One of the snipers on my SWAT team had an earlier version of the PRS on an AR-10. His experiences with the PRS were very positive, as the stock was designed to personalize the positioning of the shooter to the rifle, and could be accomplished while on target. Considering the popularity of Magul products, including the PRS line, I am confident that the new PRS Gen 3 will be another winner for one of the strongest rifle accessory companies in the world.

Here the PRS Gen 3 has the adjustments at their lowest settings.

Here the PRS Gen 3 has the stock adjustments at their lowest settings.

Magpul PRS Gen 3

The Magpul Prs Gen 3 is a precision stock designed for the AR-15/M-16 and AR-10/SR-25 rifle platforms. The PRS Gen 3 features a tool-less length of pull and cheek piece height adjustment, allowing the shooter to make fine or large adjustments in the field and even while on target. This is incredibly important for police or military snipers, who may require fine adjustments prior to engaging hostile human targets. Even pre-setting positions is no guarantee, if the sniper had to cross rough terrain to reach their final shooting position.

The tool-less LOP and height adjustments are made with turn knobs.

The tool-less LOP and height adjustments are made with turn knobs.

The PRS Gen 3 makes solid adjustments for length of pull (LOP) and cheek piece height using durable and high quality, machined aluminum detent knobs. Every aluminum component on the PRS Gen 3 has been finished with MIL-A-8625F, Type III, Class 2 hard anodizing. The steel adjustment tubes for the adjustment knobs have been Melonite treated to endure exposure to the elements.

The height and cant adjustable butt-pad really helps dial in a perfect fit.

The height and cant adjustable butt-pad really helps dial in a perfect fit.

The PRS Gen 3 (Precision Rifle/Sniper) stock provides the shooter a stable interface for shoulder and cheek rests, and is designed for semi-automatic rifles. The Magpul Prs Gen 3 offers a nearly universal fit, but is optimized for rifle-length receiver extensions. The PRS Gen 3 will also mount to many Mil-Spec carbine and A5-length tubes depending on manufacturer configurations.

The PRS Gen 3 includes a cant/height-adjustable rubber butt-pad, and rotation-limiting QD sling swivel cups for sling attachment. In addition, the PRS Gen 3 has integrated M-LOK® slots on the bottom for rear monopod mounting.

M-Lok attachment slots allow mono-pod and other accessories.

M-Lok attachment slots allow mono-pod and other accessories.

Leaning on the highly popular and functional Quick-Detach sling systems, the PRS Gen 3 comes with ambidextrous aluminum QD swivel mounts. There is a mount on the front of the stock, for a more single-point sling set up, and another QD swivel mount on the rear of the stock for a more 2-point traditional mount. The rear QD mount is interchangeable from left to right side of the stock. There is also a 1.25 inch traditional sling loop incorporated with the rear QD swivel mount, providing even more options for carry. Like other Magpul products, the PRS Gen 3 is made in U.S.A.

QD sling mounts offer versatile sling mounting options.

QD sling mounts offer versatile sling mounting options.

Magpul PRS Gen 3 Features

  • Mounts to rifle-length receiver extension tube without A2 spacer
  • Accommodates Mil-Spec M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates
  • Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
  • Rubber butt-pad provides positive shoulder purchase preventing slippage
  • Rubber butt-pad is adjustable for both cant and height
  • Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
  • Steel adjustment shafts finished with Melonite® for wear and corrosion resistance
  • All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
  • Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod
  • Sling Mounts
    • Front/Rear – rotation-limited QD sling swivel mounts
    • Rear – 1.25″ aluminum sling loop (left-right reversible)
The PRS Gen 3 with fully extended adjustments.

The PRS Gen 3 with fully extended adjustments.

Magpul Gen 3 PRS Specifications

  • Weight: 27.8 ounces
  • Weight (with rifle receiver extension): 31.2 ounces
  • Weight (with carbine receiver extension):  31.7 ounces
  • Length: 11.5 – 12.9 inches
  • LOP: 14.3 – 15.7 inches
  • LOP Adjustment Range: 1.4 inches
  • Cheek Height Adjustment Range: 0.8 inches
  • Available Colors: Black, OD Green, Flat Dark Earth, Stealth Gray
  • MSRP: $254.95.
Magpul PRS Gen 3 OD Green.

Magpul PRS Gen 3 OD Green.

Magpul PRS Gen 3 FDE.

Magpul PRS Gen 3 FDE.

Magpul PRS Gen 3 Stealth Gray.

Magpul PRS Gen 3 Stealth Gray.

Final Thoughts

The Magpul PRS Gen 3 rifle stock is a well thought design for serious shooters. Having a fully adjustable stock for LOP, height, and cheek weld is an almost must for today’s police snipers. For a sniper to be at their best, they need to become one with their rifle. The PRS Gen 3 provides plenty of adjustments to individualize the feel and fit of the rifle to the particular sniper fielding the rifle.

From previous experiences with earlier PRS models I can attest they are very well-built, durable, weather-resistant, and perhaps most importantly – comfortable to shoot. Without hesitation I would recommend the PRS stock for use on a police sniper rifle.



This post first appeared on Blue Sheepdog - Police Gear Reviews, Training And Officer Safety Tips., please read the originial post: here

Share the post

New Magpul PRS Gen 3 Rifle Stock

×

Subscribe to Blue Sheepdog - Police Gear Reviews, Training And Officer Safety Tips.

Get updates delivered right to your inbox!

Thank you for your subscription

×