Laboratory Cement Autoclave:
These Laboratory Cement Autoclaves are manufactured as per IS: 4031 and are in huge demand due to its unmatched quality and excellent performance in respective application areas. This is designed for conducting accelerated soundness tests on cements. These are imported from reliable vendors who use stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing.
It comprises of a hardened steel barrel with a welded warm protected metal lodging alluringly wrapped up. The connected control unit encases a touchy weight controller and weight measure. Power switches and pilot lights for controlling the electric heating units.
Inside chamber estimations are 10.5 cm distance across x 40.5cm tallness reasonable for activity on 230 V, 50 Hz Single Phase A. C. supply. Provided finish with test bar holder, uncommon rack to hold examples over the water level in the autoclave and in a vertical position to uncover them in a similar way. A Digital PID Controller is fitted for controlling the coveted temperature.
Specifications of Laboratory Cement Autoclave:
Working Pressure: 21Kg/cm2 at 2150C
Pressure Vessel: ID 150mm x Depth 500mm.
Overall Dimensions: 390mm. (L) x 390mm. (W) x 810mm. (H)
Heater: 3000watts.
Supply: 220 volts, 50 Hz, single phase.
Inside chamber dimensions: 15cm. dia. x 60cm. height.
Suitable operation on 220 volts, 50Hz, single phase, AC supply.
Enhancements:
Test Bar Holder, Special Rack to hold instrument higher than water level in the autoclave and in a upright position to indicate them compatability.
development of Cement Testing Equipment:
1.High weight autoclave arranged especially to lead revived soundness tests on Cement or the autoclave advancement tests.
2.Mounted out of a solid supporting packaging, and encased in a glow ensured/metal hotel which is alluringly finished in hammertone paint.
3.The best has a weight controller wellbeing valve and weight check.
4.The unit appended to the side of the lodging has control switches and pilot lights for controlling the electric warming unit.
These Laboratory Cement Autoclaves are manufactured as per IS: 4031 and are in huge demand due to its unmatched quality and excellent performance in respective application areas. This is designed for conducting accelerated soundness tests on cements. These are imported from reliable vendors who use stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing.
It comprises of a hardened steel barrel with a welded warm protected metal lodging alluringly wrapped up. The connected control unit encases a touchy weight controller and weight measure. Power switches and pilot lights for controlling the electric heating units.
Inside chamber estimations are 10.5 cm distance across x 40.5cm tallness reasonable for activity on 230 V, 50 Hz Single Phase A. C. supply. Provided finish with test bar holder, uncommon rack to hold examples over the water level in the autoclave and in a vertical position to uncover them in a similar way. A Digital PID Controller is fitted for controlling the coveted temperature.
Specifications of Laboratory Cement Autoclave:
Working Pressure: 21Kg/cm2 at 2150C
Pressure Vessel: ID 150mm x Depth 500mm.
Overall Dimensions: 390mm. (L) x 390mm. (W) x 810mm. (H)
Heater: 3000watts.
Supply: 220 volts, 50 Hz, single phase.
Inside chamber dimensions: 15cm. dia. x 60cm. height.
Suitable operation on 220 volts, 50Hz, single phase, AC supply.
Enhancements:
Test Bar Holder, Special Rack to hold instrument higher than water level in the autoclave and in a upright position to indicate them compatability.
development of Cement Testing Equipment:
1.High weight autoclave arranged especially to lead revived soundness tests on Cement or the autoclave advancement tests.
2.Mounted out of a solid supporting packaging, and encased in a glow ensured/metal hotel which is alluringly finished in hammertone paint.
3.The best has a weight controller wellbeing valve and weight check.
4.The unit appended to the side of the lodging has control switches and pilot lights for controlling the electric warming unit.
