There are so many DIY projects that you can take at home. But trust me none of them is easier than changing a Toilet seat. I have met people who initially thought this task was hard only to realize how wrong they were. In this post, I will show you how to change a toilet seat. Let’s take a look at what I have prepared for you.

In this review we will cover

• Step 1. Measure Your Toilet
• How to Measure the Size of Your Toilet
• Step 2. Buy the Right Seat
• Step 3. Remove the Old Seat
• Step 4. Layout the New Toilet Seat
• Step 5. Install Your New Toilet Seat
• Step 6. Test Your Toilet Seat
• Additional Tips
• Conclusion of the How to Change a Toilet Seat

Step 1. Measure Your Toilet

The very first thing that you must do is to get the exact size of your toilet. This cuts across. It doesn’t matter the toilet style that you have. Elongated or round, make sure you get the right dimensions.

How to Measure the Size of Your Toilet

Here is a simple guide to measuring the size of your toilet. You don’t need a partner to do it.

• Identify the two mounting holes on the end of your toilet
• Take a tape measure and pin the end at the center of the two mounting holes
• Stretch the tape measure to the front of the toilet bowl
• Take the measurements and note them on a piece of paper

This should give you the proper fit/ the exact size of the toilet.

Step 2. Buy the Right Seat

When buying the seat for your toilet, you need to make sure that the seat is the perfect fit. To do this, you will use the measurements that you had found above. In turn, you should get a seat that fits properly on your toilet bowl.

Another thing that you should also look at is the style of design. Don’t but an elongated toilet seat for a round bowl and vice-versa. Instead, go for a toilet seat with the same shape as your toilet bowl.

Step 3. Remove the Old Seat

If you are going to change a toilet seat then it means that you already have one. To create a space for the new seat you have to remove the old seat first.

This should be a very simple process too. All you need to do is to identify the two mountings holes from where you began your measurements. These holes are used to secure the toilet seat so it doesn’t move.

They are the holes through which the seat’s bolts pass through. Access underneath the mountings and remove the nuts that are securing the bolts. This will unfasten the seat’s hold. You can then remove the two nuts on the toilet’s hinge and lift out the seat.

NOTE: One problem that many people often face on how to change a toilet seat is an old seat that’s stuck. Old seats can get stuck if the nut and bolts that were used are rusted or corroded too. In case this is the problem, find a hacksaw and cut the bolts out.

Step 4. Layout the New Toilet Seat

Your new toilet seat should come with a set of mounting bolts and nuts. The cover should also be detachable. If everything is in place, it is time to install the new toilet seat.

Step 5. Install Your New Toilet Seat

First, clean around the mounting holes before you install your new seat. This will remove gunk and help you to work in a clean space.

Next, take the new seat and detach the cover – if it has any and confirm if it is intact. Now insert the bolts through the bolt spacing left under the seat and on the part that will rest right at the top of the mounting toilet’s holes.

Once the bolts are in place, take the seat and set it on top of the toilet. The two bolts should slip through the mounting holes and remain suspended beneath. The suspended section is where the bolts will roll through.

Set the toilet seat in the middle of the bowl. Make sure that it is balanced and straight. Then access the extended parts of the bolts and tighten using the nuts. Take caution not to move the seat from its set position.

NOTE: Most nuts come with tool-free technology that allows you to tighten and loosen them with your bare hands. And to get a very tight grip with no play, you can use a piece of cloth to hold the nuts as you tighten.

Step 6. Test Your Toilet Seat

Your job should be done. However, you need to ensure that the toilet seat is working properly. The SoftClose, for instance, will only work if your toilet seat is properly fixed. So test your toilet seat and make sure that it is working properly.

Additional Tips

How to change a toilet seat is simple. Even so, you need to learn a few reasons why you might want to change your toilet seat. I have listed the most common ones to start you off right away.

• The toilet seat can be old and dull
• If the seat is cracked or damaged
• When doing a facelift to your bathroom
• In case the color doesn’t blend in well
• If you need a change

NOTE: When you move into a new apartment, you want it to become a home that suits your needs. And doing a little upgrade around the toilet can be a great way to start.

Conclusion of the How to Change a Toilet Seat

If you want to learn how to change a toilet seat, there is no better way to do that than the hands-on method. Doing-It-Yourself will help you to acquire the firsthand experience and to understand the process better.

What you need to do is to find an expert guide that will take you through the process. This guide has been prepared in the simplest way to provide you with easy understanding. And is also coined to make your work easy.

My advice is that you take your time to understand how this is done before you start doing it. This will eventually help you to get the best results out of the process.

The post How to Change a Toilet Seat Step by Step Guide [Update 2019] appeared first on Best Air Mattress.