Getting Rid of Small Spots

One of the tough challenges of cleaning timberland boots is getting rid of small spots. Check out easy ways of cleaning out small spots.

Use a Brush to Get Rid of Small Debris

Use an Eraser to Get Rid of Scuff Marks

There is an old trick used to get rid of scuff marks. All you need is a small pencil eraser. Rub the eraser on the scuff marks to clean them off. Ensure to rub and stop when the scores are no longer visible. This same step works for cleaning off scuff marks from mechanics work boots. 

Using a pencil eraser is a fast way of removing light marks and scuffs from your shoes. You can get a generic eraser used for suede or the unique cleaning bar for timberland boots. But the eraser works fine.

Brush Off the Eraser Debris

After cleaning off the scuffs with an eraser or cleaning bar, you need to get rid of the eraser debris from your boots. To do this, you need a soft suede or nubuck brush.

Note that brushing off the eraser debris is different from the regular brushing strokes. You have to brush the boots in an outward direction. Hence, you not only remove the debris from the shoe but keep the glean uniform.

Remove Dirt Spots

It’s advised you clean off these spots at least once a week. Do this especially when you rock the boots every day. It would prevent the buildup of small spots and dirt that would ruin the boot in the long run.

Deep Cleaning a Timberland Boot

Get Original Cleaning Products

The first step to deep-cleaning your timberland is getting the right cleaning products. There are tons of unreliable cleaning products that could ruin the fabrics of your boots. Thus, your cleaning products should be mild on your boots. Do not buy generic work boots used in cleaning logger boots for your timberland.

The standard fabrics used for timberland boots are leather and suede. The first sets of timberland boots have nubuck fabrics. Ensure to get products that are good for your boot’s fabric.

Also, get cleaning products that match the color of your boot’s fabric. Most generic timberland cleaning products work fine for the yellow leather used for timberland boots. But, if you have a boot with different colors, get a shoe that matches the color of your boots.

Remove and Clean the Shoelaces

The second step towards deep-cleaning your timberland boots is removing the shoelaces. With the shoelaces on, you won’t be able to clean the boots. Thus, you should remove them to give you access to all the areas of the boot.

If the shoelaces are dirty, you have to hand-wash them and air-dry them before fixing them back on the boots. Use warm, soapy water to wash them until they get back to the original color. Rinse off with clean water and hand them to dry.

You have the option of washing them with another dirty laundry with a washing machine. But, you may have to wash alone if the laces are too messy.

Clean With a Soft-bristle Brush

Hold the Boot

Before you scrub the shoes, you must learn how to hold them to allow the brush to get too deep areas. The best way to hold the boot is to put your hands inside the foot area. This allows for the even distribution of pressure that will enable you to clean.

Using your hands pushes up the wrinkled area and will help restore these areas to their original shape. Learn to use the right amount of pressure on the areas you are cleaning for a smooth process.

Scrub the Soles

The first place you have to scrub is the soles of the boots. The soles are usually dirtier; hence when you clean them first, you reduce the amount of dirt on your hands. Use a toothbrush and soapy mixture to wash off dirt and debris on the soles.

Use the Timberland Rubber Sole Brush for quick cleaning. For dried-in dirt in the threads, you can use a cotton swab to clean them off.

Scrub the Fabrics With a Timberland Boot Cleaner

Get your boot’s cleaner and your brush ready. You also need warm water to rinse off the cleaner. You need a brush with soft bristles for this stage. Use the brush to distribute the cleaner and get the dirt off your shoe.

Get Boot-cleaning Sandpaper

There are stains that you can’t get out with a brush and boot cleaner. For these types of stains, you need to use boot-cleaning sandpaper. Sandpaper, with about 400-grit, works best for this purpose.

But, you should only resort to this method if the stains do not go out after several brushing. Move the sandpaper in a single direction around the stained area and stop once the stain is out.

Rinse Off With Warm Water

After getting off all the stains using the boot cleaner, you need to rinse off the boots. Use warm water and ensure you don’t use so much water like you would do on a cowboy boot.

Deep Clean Only When Necessary

While it’s essential to clean your boots, you should feel only deep clean only when it’s necessary. You can deep clean your boots weekly when you wear them every day, and they get filthy. If you don’t use the boots, then you can deep clean them monthly.

Dry in Warm Air

After deep cleaning your boots, you will have to dry them out for about 24 hours. Before you dry the boots, ensure to straighten the wrinkled parts.

Some parts can get out of shape when you scrub them. Fix these parts before you dry them out in warm air. Dry the boots in a warm environment for at least 24 hours to make sure they dry out before using them again.

Bottom Line

The following tips will help you clean out your timberland boots. Remember, you need to clean your boots, especially if you wish to keep them looking their best for a long time. Pay attention to spots and stubborn dirt when scrubbing the boots.

Also, use appropriate cleaning products made for your boots. When you follow the steps above, you will not only protect the fabrics of your boots but keep them shimmering.