Overview of RULE INDUSTRIES 1100 GPH Rule-Mate Automatic Bilge Pump

The RULE INDUSTRIES 1100 GPH Automatic Bilge Pump guarantees superior performance in water evacuation, ensuring a dry and clean bilge. Inspired by the original Rule design, the newly improved RuleMate series operate with an internal level sensor. Once the water level in the bilge reaches a height of 2″ (5cm), the pump gets activated and begins to discharge water. The pump ceases operation when the water level drops to 3/8″ (0.9cm), and will reactivate when the water level rises.

Considering the inevitable presence of debris and contamination in bilges, the RuleMate pump comes with a back up feature. This feature comes into play if the level sensor gets clogged, it prevents the pump from running without stop, thus saving battery and still maintaining automatic operation.

Features of the RuleMate Automatic Bilge Pump

–

Enhanced Flow: The restructured impeller offers up to 10% more flow using the same amount of energy.

–

Auto Sense Intelligence: The in-built water level sensor triggers the pump’s operation automatically.

–

Backup Feature: This prevents constant operation of the pump if the sensor gets clogged, substituting it with a 2.5-minute cycle mode.

–

Compact Design: The newly redesigned RuleMate is 2/3 the size of its predecessor.

–

Built-In Thermal Cut-Off (TCO): Added safeguard for both the pump and the vessel.

–

Back Flow Prevention: Minimizes residual water in the bilge, reducing odor and promoting a cleaner bilge.

–

Concealed Body Air Vents: Aid in preventing air lock in complex plumbing installations, assisting the check valve.

–

Threaded Discharge: Simplifies installation and maintenance procedures.

Rule Mate Owner’s Manual

For comprehensive use and maintenance guidance, please refer to the Rule Mate Instruction Manual.

The post Rule Industries 1100 GPH Rule-Mate Automatic Bilge Pump Review appeared first on BoatingWorld.