Hello everyone I hope to find some help here.
Recently bought a non-running 2008 DS 450.
Checked it out and found that there is no ground available at the main relay, I believe its the (OR/BU wire coming from the ECM). If I jump the main relay connection I then have power at the Fuses on the shifter side but still nothing. I can make the engine turn by jumping the solenoid but no neutral lights, no fuel pump no power over all. Already checked all the fuses and relays they are good.
(Picture...
PLEASE HELP!!! NO power at all ⚡
Recently bought a non-running 2008 DS 450.
Checked it out and found that there is no ground available at the main relay, I believe its the (OR/BU wire coming from the ECM). If I jump the main relay connection I then have power at the Fuses on the shifter side but still nothing. I can make the engine turn by jumping the solenoid but no neutral lights, no fuel pump no power over all. Already checked all the fuses and relays they are good.
(Picture...
PLEASE HELP!!! NO power at all ⚡
This post first appeared on Can-Am DS-450 Forum :: DS450HQ.com, please read the originial post: here
