NOTE that this Tutorial is strictly for Rooting Samsung Galaxy S6 Edge Plus SM-G928R4 (US Cellular). please don't try it on other Galaxy S6 edge variants.
This site or the developers are not responsible if you damage or brick your device. Do it at your risk and follow the instruction correctly.
How to Root Galaxy S6 Edge Plus SM-G928R4 (US Cellular).
1- Download CF Auto Root for US Cellular S6 Edge Plus G928R4.
2- Unzip the CF Auto Root .zip file that you downloaded to your device from the link above.
3- You’ll get Odin and CF Auto Root Tar file and some more.
4- Run/open Odin3 v3.10.6.exe file from the extracted files on your PC.
5- (If applicable) Enable OEM unlock on your device:
6- Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
7- Go back to the main Settings page, scroll to the bottom and select “Developer options” from there.
8- Under Developer options, look for “Enable OEM unlock” checkbox/toggle and make sure you Check it or turn it ON.
9- Boot your device into Download mode:
Switch off your device.
10- Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
11- Press Volume Up on the warning screen to accept it and boot into Download mode.
12- Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an“Added!!” message.
13- Now click on the AP tab on Odin window and select the CF Auto Root .tar file.
14- Click the Start button in Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
15- Your device will automatically reboot when Odin is done flashing, and the CF Auto Root script will be visible on your device, doing its magic.
└ You can disconnect the device from PC at this stage.
That’s all. Once booted, your Samsung Galaxy device should be rooted. To verify, download/install any root checker app from the Play Store.
All thanks to Prof Moks of Technaij.com for his wonderful research and contribution!
This site or the developers are not responsible if you damage or brick your device. Do it at your risk and follow the instruction correctly.
How to Root Galaxy S6 Edge Plus SM-G928R4 (US Cellular).
1- Download CF Auto Root for US Cellular S6 Edge Plus G928R4.
2- Unzip the CF Auto Root .zip file that you downloaded to your device from the link above.
3- You’ll get Odin and CF Auto Root Tar file and some more.
4- Run/open Odin3 v3.10.6.exe file from the extracted files on your PC.
5- (If applicable) Enable OEM unlock on your device:
6- Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
7- Go back to the main Settings page, scroll to the bottom and select “Developer options” from there.
8- Under Developer options, look for “Enable OEM unlock” checkbox/toggle and make sure you Check it or turn it ON.
9- Boot your device into Download mode:
Switch off your device.
10- Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
11- Press Volume Up on the warning screen to accept it and boot into Download mode.
12- Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an“Added!!” message.
13- Now click on the AP tab on Odin window and select the CF Auto Root .tar file.
14- Click the Start button in Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
15- Your device will automatically reboot when Odin is done flashing, and the CF Auto Root script will be visible on your device, doing its magic.
└ You can disconnect the device from PC at this stage.
That’s all. Once booted, your Samsung Galaxy device should be rooted. To verify, download/install any root checker app from the Play Store.
All thanks to Prof Moks of Technaij.com for his wonderful research and contribution!
This post first appeared on TechsVibe.com / Nigeria Free Browsing And Tech Bl, please read the originial post: here
