Device purpose:
This circuit is intended to drive the various lights decorating the crib prepared during Christmas season at many homes in Latin Countries, especially for children delight, in order to obtain realistic light-effects.
Features:
Parts:
Notes:
This circuit is intended to drive the various lights decorating the crib prepared during Christmas season at many homes in Latin Countries, especially for children delight, in order to obtain realistic light-effects.
Features:
- Alternating day and night with lights gradually dimming from full-on to full-off and the opposite.
- Slow turn on of model-houses interior as night approaches, and slow turn off as sun rises, with presettable intensity, thus imitating candles' light for a more realistic effect.
- Flickering ever-running circuit driving bulbs for fires, firesides, lanterns effects etc.
- Total cycle duration: 2 minutes. Day duration: 1 minute, 15 seconds. Night duration: 45 seconds. (All values are approximate).
Parts:
- R1___________150K 1/4W Resistor
- R2,R9,R14_____22K 1/4W Resistors
- R3,R11_______220K 1/4W Resistors
- R4,R12________10K 1/4W Resistors
- R5___________100K 1/2W Trimmer Cermet
- R6,R7,R13,R15__1R 1/4W Resistors
- R8____________33K 1/4W Resistor
- R10__________270K 1/4W Resistor
- R16___________47R 1/4W Resistor
- C1,C4________100nF 63V Polyester Capacitors
- C2,C6_________10µF 25V Electrolytic Capacitors
- C3,C5________100µF 25V Electrolytic Capacitors
- D1-D3_______1N4148 75V 150mA Diodes
- IC1___________4060 14 stage ripple counter and oscillator IC
- IC2__________LM324 Low power Quad Op-Amp IC
- IC3__________78L12 12V 100mA Voltage regulator IC
- Q1,Q3,Q5_____BC238 25V 100mA NPN Transistors
- Q2,Q4,Q6_____BD681 100V 4A NPN Darlington Transistors
- J1___________Miniature input socket,
- suited for commercial plug-in variable voltage power supplies
- J2-J5________Two ways output sockets
- Input J1 is connected to a commercial wall plug-in power supply transformer adapter with variable output settled to 12-15Vdc, and a required minimum output capability of 600mA @ 12V. Using a good number of bulbs the output capability must reach about 1.5A.
- Output J2 is connected to a permanently-on 12V 1W blue bulb(s) for night effect.
- Output J3 is connected to several 12V 2.2W bulbs in parallel for sunlight effect. Max. output current: 1.2A (i.e. 6-7 bulbs).
- Output J4 is connected to several 12V 1W or 1/2W micro-bulbs in parallel for house-interiors lights. Max. output current: 600mA (i.e. 7-8 1W bulbs, doubling in number if 1/2W).
- Output J5 is connected to one or several 12V 1W or 1/2W micro-bulbs in parallel for fires, firesides, lanterns effects etc. Max. output current: 600mA (bulbs total number same as above).
- All outputs are current limited, and short-proof for a reasonable lapse of time.
Notes:
- Total period length can be varied changing C1 and/or R1 values.
- Day-night ratio can be varied changing R10 value slightly.
- Threshold voltage of turn on and off of model-houses lights can be varied changing slightly R8 and/or R9 values.
- Turn on and off speed of model-houses lights can be varied changing R11 value.
- Current limiting can be varied changing Q2, Q4 & Q6 Emitter resistors.
- Heatsinks for Q2, Q4 & Q6 are needed if current limits are increased.
