FCU1104 Embedded Computer
FCU1104 embedded computer is designed based on NXP i.MX6ULL SoC(Cortex-A7) with advantages of cost efficient, advanced performance and high stability. It runs at speed of 792MHz, carries RAM 256MB and NandFlash 256MB(RAM 512MB, eMMC 4GB optional) on-board. Supported with OS Linux 4.1.15 complies various network protocols. It integrated with RS485/RS232, Ethernet, 4G, WiFi and LoRa all in one, which make it very convenient for development.
FCU1104 Embedded Computer Features
- ● Industrial designing, can work stably in rough industrial environment: -40℃~+85℃;
- ● Various wireless communication solutions: WIFI, 4G, LoRa;
- ● Large set of peripherals: RS485/RS232, Ethernet, DI/DO, CAN;
- ● OS: Linux4.1.15;
- ● Multiple network protocols;
- ● Strict peripheral protecting solution;
- ● Low power consumption, super capacitor solution for data backup in case of power failure.
Related Articles
FCU1104 Embedded Computer
Industrial grade components and rugged sheet material case; 9~ 36V input; anti-reverse and over-current designing protection solution
Super capacitor for power failure solution
When power supply is interrupted unexpectedly, it will switch to super capacitor supplying mode, and generate interrupt indicator to deal with unexpect power failure for data backup
Large set of peripherals for data collection
LED and buzzer for device status monitor, basic version and upgrade version optional. The device designed with
dual Ethernet , and 8 RS485/ RS232 by terminals for data transmission;
2 dry contact for DI and 2 relay for DO for front end device status monitoring; 1 CAN and other wired peripherals for various communication purpose
Multiple network protocol supporting
Two LoRa models optional, transmission distance up to 3km~10km.Transparent transmission and fixed transmission are both supported,
four online working modes switchable, high interference, long distance transmission, stable communication and low power consuption.
4G/WIFI
4G and WiFi are optional and alternative to avoid redundancy. 4G default mode Cat.1 and compatible
with Cat.4 available for both general SIM card and IoT card. Complies with IEEE802.11b/g/n, supports both STA and AP in WPA2 encryption mode
RS485
Supports Modbus(RTU mode)
Ethernet
10M/100M auto-negotiable, supports both static and dynamic assigned IP, and also MAC address settings
Optimized Linux system with practical network protocols
Optimized Linux4.1.15 integrated with multiple network protocols for various peripherals connection and access;
TCP/IP, UDP, DHCP, TFTP, FTP, Telnet, SSH, Web, HTTP, IPtables, MQTT, SQLite, convenient for remote debug and maintenance
