There’s a lot of talk about What is the Headphones Driver? when it comes to headphones. But what, exactly, is the driver? And why is it so important?
In this post, we’ll take a closer look at What are the Drivers in Headphones? and explain why they play such an important role in your listening experience.
We’ll also touch on the different types of drivers available and what each one can offer you.
So if you’re curious about drivers and want to know more, this article is just for you.
What is the Headphones Driver?
The headphones driver is a critical component in headphones. It converts the electrical signal into sound waves that travel through the air and are heard by the listener.
Headphone drivers come in a variety of sizes and shapes and vary in quality.
Some drivers are designed for high-end audio equipment, while others are designed for less expensive headphones.
Thus the quality of drivers depends on the cost of headphones.
The quality of a headphone driver is important because it affects the overall sound quality of the headphones.
A good driver should produce clear, accurate sound without any distortion.
It should also be able to handle a wide range of frequencies so that listeners can hear all the nuances in their music.
Poor quality drivers can produce muddy or distorted sound, which can be unpleasant to listen to.
You may also like
Difference Between Earbuds vs Earphones vs Headphones
What is the Driver Size in Headphones? Why it is Important?
When it comes to headphones, the size of the drivers plays an important role in the overall sound quality.
Drivers are small speakers that fit inside the ear cups and produce sound.
The larger the drivers, the better the sound quality will be. However, this also means that headphones with larger drivers tend to be more expensive.
If you’re looking for great sound quality on a budget, look for headphones with 40mm or larger drivers.
You may also want to consider over-ear headphones, as they tend to have even larger drivers that can provide an even better listening experience.
Whatever type of headphones you choose, make sure to pay attention to the size of the drivers before making your purchase.
Does a higher driver mean better sound?
The size of the headphone driver does not necessarily correlate with better sound quality.
It is more important that the headphone driver be able to produce a wide range of frequencies accurately.
For this reason, many headphones manufacturers now produce earbuds with multiple drivers, one for each frequency range.
This design allows for more accurate reproduction of sound.
So, if you are looking for the best sound quality, it is important to consider the type of headphone driver, rather than the size.
Different Types of Headphones Driver
Headphone drivers are the part of the headphones that create the sound.
The type of driver affects the sound quality, so it is important to choose the right type of driver for your needs.
There are three main types of headphone drivers: Dynamic, Planar Magnetic, and Electrostatic.
Dynamic Driver
The most common type of headphone driver is the dynamic driver.
Dynamic drivers use a small coil of wire (the voice coil) that is wrapped around a magnet.
When electricity flows through the coil, it creates a magnetic field that moves the diaphragm, which produces sound.
Advantages:
- Dynamic drivers are less expensive to produce than other types of headphone drivers.
- They can be very small, so they are often used in in-ear headphones.
- They usually have a good bass response.
Disadvantages:
- The voice coil can cause distortion at high volumes.
- They are not as efficient as other types of headphone drivers and so require more power to operate.
- The moving parts can wear out over time.
Planar Magnetic Driver
Planar magnetic drivers use a thin sheet of material (the diaphragm) with a conductive layer on one side and a permanent magnet on the other side.
The magnets are arranged in a pattern so that they cancel out each other’s magnetic fields, creating a very strong magnetic field around the conducted layer.
This type of driver is sometimes called an “isodynamic” or “morphodynamic” driver.
When electricity flows through the conductor, it interacts with the magnetic field and causes the diaphragm to vibrate, producing sound.
Advantages:
- Planar magnetic drivers tend to have very low distortion levels.
- They are very efficient and so require less power to operate than dynamic drivers.
- The moving parts are very small, so they are less likely to wear out over time.
- They often have adjustable magnets that allow you to fine-tune the sound quality.
Disadvantages:
Planar magnetic drivers are more expensive to produce than dynamic drivers.
They are larger and heavier than dynamic drivers, so they are not often used in in-ear headphones.
They usually have a poor bass response because the diaphragm is so light and thin.
Electrostatic Driver
Electrostatic drivers use a thin sheet of conductive material (the diaphragm) between two metal plates (the stators).
A voltage is applied to the stators, which creates an electrostatic field between them. This field interacts with the electric field produced by the current flowing through the conductor, causing the diaphragm to vibrate and produce sound.
Advantages:
- Electrostatic drivers tend to have very low distortion levels.
- They usually have very good frequency responses across all frequencies (including bass).
- Because there are no moving parts, they are less likely to wear out over time than dynamic or planar magnetic drivers.
Disadvantages:
- Electrostatic drivers require special amplifiers that can provide enough voltage to operate them properly.
- They are more expensive to produce than dynamic or planar magnetic drivers.
- They are larger and heavier than other types of headphone drivers.
What are dual-driver headphones?
A dual-driver headphone has two drivers, one for the lows and one for the highs. This design is supposed to create a more balanced sound.
Many people believe that dual-driver headphones produce better sound quality than traditional headphones.
This is because each driver is responsible for a specific range of frequencies, so they can be tuned more accurately.
As a result, the overall sound is cleaner and more accurate.
Dual-driver headphones are also often marketed as being better for travel because they offer improved noise isolation and bass response.
How do I find my headphones driver?
You can find your headphones’ driver by checking the product’s specifications. The product specification will list the type of driver used in the headphones.
If you’re not sure what type of driver your headphones have, the easiest way to find out is to take a picture of the headphones and email it to us.
We’ll be happy to help you identify the driver.
Now that we’ve answered some common questions about 40mm or larger driver headphones, let’s take a look at 7 of the best pairs on the market today.
- Sony WH-1000XM5 Noise-Cancelling Wireless Headphones
- Jabra Elite 85h Noise-Cancelling Wireless Headphones
- Bose QuietComfort 45 Noise-Cancelling Wireless Headphones
- Sennheiser HD 450BT Noise-Cancelling Wireless Headphones
- JBL LIVE 650BTNC Noise-Cancelling Wireless Headphones
- Beats Solo Pro Noise Cancelling On-Ear Headphones
- Skullcandy Venue Noise Cancelling Wireless Headphone.
Conclusion
In this post, we’ve taken a look at what headphones drivers are and how they work.
We’ve also explored the different types of drivers on the market and which might be best for you.
I hope this has been helpful in giving you a better understanding of headphones drivers and how to choose the right ones for your needs.
Let me know in the comments below if there is anything else you would like me to cover about headphones drivers. Until next time!
To stay up-to-date with the latest technology updates, follow us on Instagram, Facebook & Twitter, or join our Telegram Group.
