There are some devices that are not coming from the factory and seem to have some wrong levels on Bluetooth calls or just you need to improve to reveal the full potential of our DSP processor at low frequencies.
This is possible by writing the parameters. by those 2 options:
Solving by EcuTweaker or DDT4ALL
Read more at:
Now you need to connect your ELM adapter to the OBD connector of the car as CAN2.
In this way you can use some ordinary wires:
pin14 ELM – connect to pin12 OBD
pin4 – pin4
pin5 – pin5
pin16 – pin16
Open DDT4all and choose one of the ECU:
ulc_gen1: for the MN1
ulc_gen2: for the MNE
ulc_gen3: new functions for the MNE 8.0.5
ulc_gen4: new functions for the MNE2 (Linux)
Now go to Setting: ECU name-> ULC_gen4_v.1.4 (1.0.13.x or 1.0.15.x)
!!NEW UPDATE MEDIANAV MN3 EVO2 SOUND 1.0.15.x → ✅DOWNLOAD AFTER BEER DONATION
More about Equalizer Arkamys [BEST 9.1.4 + 1.0.13 SOUND OPTIMIZATION] can be readed here:
Equalizer Arkamys [BEST 9.1.4 + 1.0.13 SOUND OPTIMIZATION] – Lisandru MEDIANAV DDT4ALL Blog
Important: If NODATA is appearing on read data it means that you are not connected by CAN 2 connection or the ECU is not correctly selected: ULC_Gen4 v1.4 .
Important: If you get errors like access denied or something you can push on write when the Navi is starting after you’ve pushed the power long for restarting and will succeed.
Go to ddt4all and fill in Tuning parameters (download from here) from the file upstairs↑
Click Write All and Reset Hard.
Voila, a Complete System Configure message appears. The GU will reboot without asking for a pin code with a very nasty sound.
The post How to rewrite the audio Soft Bass Equaliser or BLUETOOTH calls sound by DDT4all on MN3 1.0.x.xx first appeared on Lisandru MEDIANAV DDT4ALL Blog.
This post first appeared on MEDIANAV SKINS | MAPS | WINCE6 | MICON MANAGER | DDT4ALL | NAVITEL | IGO | 7WAY | SEVENWAY | HACKS | SUPERMOD | MN1 MN2 MN3| DACIA | RENAULT, please read the originial post: here
