There are many instances where users are unable to resolve Canon Printer errors and issues. To Fix Canon Printer Error Code 5800 is one of the most annoying and challenging tasks for users, and need experts help.  The error code 5800 means the waste ink counter reset (yellow and orange light, flashing alternately several times). Canon printers usually require re-setter to restore the setting to the initial. Canon printer must be reset after doing a lot of print activity. If the Canon Printer’s want to be reset, usually characterized by blinking orange and green alternately, and on the monitor will appear error code 5800. So, if you have experienced the same problem, then you will need to follow the below-given steps or solutions to fix the issue. You can obtain comprehensive help with tech support experts at dialing Canon technical support number.

Solutions to Fix Canon Printer Error Code 5800

Solution 1:- Replace the Waste Ink Absorber

You can follow the steps below to reset the error code, but to solve the problem permanently, it will best to replace the waste ink absorber.

Step 1:- Press the “Power” Button

With the Canon Printer powered off but connected to a power source. Press the “Power” button while pressing and holding the “Stop/ Reset” button.

Step 2:- Press the “Stop/Reset” Button

• When the Power is lit, press the “Stop/Reset” button two times
• While pressing and holding the “Power” button.

Step 3:- Move Into a Service Mode

When releasing the “Power” button and the “Stop/Reset” Button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)

Step 4:- Press “Stop/Reset” Button

When the on/off lights in green, press the “Stop/Reset” button the specified number of time(s) according to the function listed in the table below.

(Each time the “Stop/Reset” button is pressed, the LED lights alternately in orange and green, starting with orange.)

Note: Make sure there is need to press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks

• 0 time Green Power off
• 1 time Orange Service pattern print
• 2 times Green EEPROM print
• 3 times Orange EEPROM reset
• 4 times Green Waste ink counter reset

Step 5:- Turn On Canon Printer

Turn off the printer. (It must be turn off) then turn it on again.

Now check the Canon Printer Error Code 5800 is resolved. If not, then go to next solution.

Solution 2:- Enter Canon Printer In Service Mode

The second solution works best for multifunction printers. You will need to get your Canon printers to run in service mode so that it can work on the problem itself, and make your printer think the ink absorber pad is empty instead of full. If you can open your printer up and clean this ink deposit, please do it because it quill is some ink in it. You can get it clean by a napkin and clear the deposit a bit.

Step 1:- Turn Off Canon Printer

First of all, turn your canon multifunction printer on.

Step 2:- Go to Press the Menu Option

Then, press the menu button on the printer.

Step 3:- Put Printer in Service Mode

Now, put your canon printer in service mode. To do this, you will have to press the “SCAN”, “COPY” and “SCAN” buttons in that exact order. Please take into account the service mode menu is entirely in English, just as a computer’s BIOS.

Step 4:- Reach to the “COUNTER ACCESS” option

You can now press the “+ key” until you’ve reached the “COUNTER ACCESS” option. Press the OK button once you are there.

Step 5:- Check Amount of Pages That You Are Printed

A page counter will now appear on your printer’s screen. The number on it indicates the number of pages you are printed in total.

Press the “OK” key.

Step 6:- Press the “COPY” button

Now, you will need to press the “COPY” button.

Step 7:- Score All the Way to Zero

Use the “-key” to lower this score all the way to zero (0). Now, press “OK” button.

Step 8:- Stop Once Get “SCAN PAGE COUNT” option

Continue to use the + symbol to look at the menu and stop once you get to SCAN PAGE COUNT. Set this counter back to zero (0) in order to wipe the score on the page counter on our canon printer, found only when it’s in service mode.

Step 9:- Set Score Back to Zero

Browse the entire menu slowly until you reach the “ABS-M DONT COUNT” option. Set this score back to zero (0) and click “OK” button.

Step 10:- Press the “Stop/Reset” Button

Press the stop/reset button after everything else has been down.

Step 11:- Turn Off “Stop/Reset” Button

Turn your printer off and back again using the on/off button on it.

Step 12:- Disconnect the Power Cable

If the INVALID KEY message appears on your computer screen at the end of this procedure, then you should disconnect the power cable from the printer and connect it once more.

By following the steps above correctly, I hope your problem will be solved.

If you still face the same canon Printer Error Code 5800, then you get immediate online help from experts at Canon Support Number.

Need Help! Dial Canon Customer Support Number

You can feel free dial at Canon Customer Care Phone Number, which is available 24×7 for your help. Through number, you can connect with our team of capable, skilled and experienced professionals, who will help you in resolving your Canon Printer issues with the reliable solutions.  The proficient experts will give you the swift, appropriate and wide-ranging solutions to solve the Canon technical problems in an easy way. Hence, call us now to get urgent help to Canon Printer queries.

The post How to Fix Canon Printer Error Code 5800? appeared first on .