Basketball is one of the most interesting sports in today’s world. Unfortunately, not everyone or every house has a wide-open space for playing Basketball. But with some very available materials, you can easily transform your garage into a basketball court.
You must be thinking that if it’s possible or not, but you will be amazed to know that you will find dedicated equipment to turn your garage into a court.
To turn your driveway into a play zone, all you need a portable Basketball Hoop, a backboard, and a rim. It’s as simple as it sounds, but still, you need some plan to do it properly.
Portable basketball hoops are usually used for driveways or yards. It includes four things; the backboard, a rim, a support pole, and a base.
When you have a hoop installed in your driveway, then we can assure you that you may want to play for practice, game, knock-out, or just a few shots on an evening or after a heavy dinner. And on weekends your house is going to be a friend’s favorite place.
So make sure that the wall you choose doesn’t have any window because you may easily smash it any day with your fun sport, and you may not want to repair a window every weekend.
Let’s get to know some more amazing and easy steps;
Facts that Should be Considered Before Installing Hoop to a Garage
- The wall where you will mount the basketball hoop should be free, and the garage door mechanism shouldn’t be near the hoop area.
- The wall surface should be flat to place it perfectly.
- The roofline should be avoided while placing it.
- Lastly, the wall should be strong enough to support the basketball hoop properly.
Plan Your Hoop Location
Before starting mounting, this should be the most important step. You need to find out if the place is suitable and make sure that anything shouldn’t come your way. And it would be much better if you have a wide open and big space.
You should try to place it in the middle of the garage if possible, and the height of the hoop should be considered. The recommended height for 4th and 5th grader players to play on an 8 ft. hoop, 6th graders to play on a 9 ft. hoop, and everyone above should play on the height 10 ft. hoop.
According to NCAA and NBA court regulations, if you want to install the rim for high school, you need to make sure that the rim’s top should be 10 ft. from the ground.
Equipment Required
Now, if you are determined that you are ready to install it, then it’s time to gather tools. Using an electronic stud finder, you need to locate the roof’s center where you will be attaching your hoop. Some more equipment you may need is:
- Measurement tape.
- Basketball hoop.
- Backboard.
- Ladder.
- Drill.
- Nut and bolts.
How to Attach a Basketball Hoop to a Garage – Few Simple Steps
Step One
You have gathered all the tools and know where to install the hoop; then, you should find a wall stud to drill the mount. It’s very easy to do in an unfinished garage because you can look inside of the wall. If you do it on a wall that is covered, then it’s tough to do. But there is a solution to it that you can use a stud finder and install the mount properly.
I would suggest you not use lag bolts for a concrete or brick wall and use concrete anchors to install the wall mount.
Step Two
After finding the stud, you should drill a pilot hole because this will help the lag bolt to sit properly, and also, it won’t spit the stud.
Some sets come with nuts and bolts rather than lag bolts. For the pilot hole, you may need to use a drill bit that is ¼ the size of your bolts. You have to use lag bolts to attach the bracket to your roof, and the socket and ratchet will be used to attach the mounting bracket.
Step Three
Now you need someone’s help to attach the backboard. The nut bolts which you may need to attach will come with your kit.
Then you have to use a water-resistant to seal the holes. This is very important to stop the bolts from rusting and also to stop water from sneaking. Rainwater can damage the studs. Test the backboard to ensure if it’s installed properly.
Step Four
The most important task is attaching the net to the rim. Once you are done with attaching the net, then pull it and check if it’s done properly.
Tips and Tricks
Some of the mountain kits don’t include hoops, so if you want to do everything easily and save up your time, bring a kit that includes hoops.
Hoops for Basketball polls and garages are different, so make sure that the ones you buy are made for garages.
Always fasten your backboard to studs rather than just drilling and screwing it for extra security.
Try to keep a helping hand to hold the ladder or while installing the backboard for security purposes.
Always double-check that if everything is tight or not, whether it’s the rim or the net.
Final Words
You will be amazed the It needs only a few moments to attach the basketball hoop completely. You will find it very easy to mount the backboard basketball hoop to your garage. It’s easier than installing an in-ground basketball hoop.
Before starting any game or practice, try to make sure that you did it properly, and to check that, try a few shots and see if it’s still in place or not. Remember that if it’s not tightening properly, then it can hurt anyone anytime.
Once you are done with everything, your weekends will be more fun and exciting, and you can practice amazing shots before any big game.
The post How to Attach a Basketball Hoop to a Garage appeared first on Team Sports Mania.
How to Attach a Basketball Hoop to a Garage was first posted on March 21, 2021 at 6:06 am.
©2019 "Team Sports Mania". Use of this feed is for personal non-commercial use only. If you are not reading this article in your feed reader, then the site is guilty of copyright infringement. Please contact me at [email protected]
