The GR-86 is quite possibly one of the best looking vehicles to come from Toyota since the late 90’s. Each curve and each line feels purposefully placed and well executed. Even the factory wheels are better than 90% of factory wheels on the streets today. However, as we add suspension, aero, and begin the hunt for mechanical grip, it becomes immediately clear that an upgrade on all four corners is the next logical step. The question then becomes, what Fitment should you go with?

Lucky for you, we are intimately familiar with the GR-86. Understanding everything from the CANBUS system limitations to the pesky RTV oil pan issues, so wheels should be no problem. Right? Well that depends. We’ll observe three very different styles of fitment and recommend a feasible wheel. Your tire choice, which we will leave completely up to you, will determine your mechanical grip, your fender modification requirement, and the overall final fit and finish of your 86. However, we have to start with what comes factory. The GR-86 has a few wheel options, but the size reference we will go with is 18×7.5 +48 with a 5×100 bolt pattern. While the bolt pattern alone with limit you tremendously, we can all agree that the factory wheel specs are… ‘Mid’ at best.

If you’re looking for something a bit wider than factory, without having to modify your fenders or worry about your fender liners, going up 1 inch in width and down 13mm in offset is the way forward. The Rotiform DTM, starting at under $1400 per set is a perfect candidate for this fitment style, sporting an 18×8.5 +35 spec and a silver finish will be sure to add a bit more style to an otherwise factory GR86, plus you can rest easy knowing you have the history and reputation of Rotiform keeping you safe. If that’s a bit out of budget, no worries, we have countless budget options in this very fitment to get you right.

 Rotiform R170 DTM | 18×8.5 +35 (Part #R1701885F3+35)

If you want fitment so flush, there’s no dip from fender to wheel face, we recommend 18×9 +40. Flush fitment often requires some trimming of the fender wells and often times, the final result is so worth it. To achieve this look, we recommend the Volk ZE40, but if that’s out of budget, the Enkei PF05 is also a sure fit for those looking to add some dimension to their GR86 without breaking the bank.

Volk Racing ZE40 | 18×9 +40 (Part #WKZW40DA)

Enkei RPF1 | 18×9 +40 (Part #504-890-8040GM)

While those looking for battle stance (less wheel, more tire) would opt for 17” wheels, the dimensions as far as width and offset are the same as they are with the 18’s. For this crowd, we recommend 17×9 +35 to +45 with minor trimming. However, if you want a little poke, keep the diameter at 18” and go with a set of SSR GTX01’s in 18×9.5 +40, add some 200 treadwear tires, and enjoy the pass.

SSR GTX01 | 18×9.5 +40 (Part #XA18950+4005CDK)

If you have any questions, feel free to reach out to one of our fitment specialists!