We have made an attempt to compile a list of the best Live Center For Woodturning in the US. It is not easy to find a good product on the internet as there are too many scams and fake products online. So we have made an effort to collect the top 10 best Live Center For Woodturning in the US.

Top 10 Live Center For Woodturning of 2022

It took us a long time to research the most relevant material for Live Center For Woodturning . After reading all of the resources, here are some of the top-rated products that you can learn more about, as well as where they are heading with their newest products in modern times. We were able to find the most reliable models on the market.

Best Live Center For Woodturning

WEN LA1158 1-5/8-Inch MT2 Tailstock Live Center for Wood Lathes

• Spacious live center provides support to larger workpieces
• Internal ball bearings provide a smooth, concentric ride for your workpiece
• Crafted with maximum precision for high accuracy performance
• Taper fits perfectly into any lathe with an MT2 tailstock
• Measures in at 1-5/8 inches in diameter

Taytools 468907 8 Piece Set Live Revolving Center MT2 Taper for Woodturning and Wood Lathes

• This live center set includes a double bearing revolving center with 7 popular accessories.
• Center has MT2 taper
• Accessories include: 1) large 65d point 0.780” diameter 2) small 55 degree point 0.390” diameter 3) hollow cup or ring center without point with 0.325” bore  4) cup or ring center with point 5) small cone center 0.780” diameter 6) hole boring location pin 0.310” diameter and 7)  hollow center with 0.580” bore for custom supports.
• Accessories are secured in place with a rare earth magnet, so not tools required.
• Come in a fitted case.

Savannah Heavy Duty Dual Bearing Live Center For Woodworking Lathes and Large or Small Wood Turning Projects. Ultra Smooth Live Center Performance with Minimal Play for MT2 Lathes

• A lot of wood turners don’t think about the live center that’s in their tailstock until it makes a funny noise, vibrates a little or even worse it seizes up and stops working altogether. In many instances, that funny noise or vibration leads to irritating marks or spirals in your project. This can typically be traced to play on a less than perfect factory lathe issued “live center”. The Precision Machined, Heavy Duty, Dual Bearing Live Center from Savannah addresses this issue and more!
• Precision machined to exacting specifications, the Savannah HD Live Center is the ideal live center for novice and professional alike. With its super smooth design, heat sealed double bearings, 3-3/8" bull nose cone, 60 degree full point cone and removable center spur point this live center is truly a tremendous value that was built to perform.
• The High quality dual bearings are heat sealed and permanently lubricated to provide vibration free performance while turning and also provide you with years of dependable use. The live center is housed in a durable casing that is made from machined turned steel alloy and is coated with a black oxide finish.
• This live center runs smooth and true during the turning process and may become your go to live center once you start using it. The Heavy Duty Dual Bearing Live Center Includes: a 3-3/8” bull nose reversible cone, 1-5/8” 60 degree full point cone, removable center spur point and a convenient knock out rod. This live center will work on lathes that accept Morse Taper 2 tail stocks.
• The Heavy Duty Dual Bearing Live Center has a 3/4” x 10tpi thread which not only allows you to attach the included accessories, it also allows you to create many different types of turning jigs for offset turning. This gives you the ability to create wonderfully unique looking projects that are off center like asymmetrical pendants, candle stick holders and more! With the included accessories you can Turn bowls, platters, dowels, vases, spheres and more!

PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center

• The PSI Super Center Crown compatible with headstocks with #2MT spindles
• Get a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive
• Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied
• Ships in plastic production sleeves at 4.8-ounces
• 4.5-by-1.5-by-1.5-inches with 1-inch crown

Live Tailstock Center with 60 Degree Cone For Use On Woodturning Lathes (MT2)

• Whether you’re a beginner or a professional wood turner, live centers have become a very useful and in all honesty a very necessary lathe accessory when turning between centers. Live centers fit directly into your lathe tailstock and rotates as your stock piece rotates.
• This type of action is great for turning because it keeps your wood from burning, yet it holds your stock in place. The live center allows for greater clamping pressures and much better control while still retaining their incredibly smooth rotation.
• It is equipped with bearings that allow it rotate at low or high lathe speeds which allows the center to be used on projects as small as pens or as large as pepper mills.The tip or live center cone is at a common 60 degree angle and measures 1-9/32” in diameter.
• This allows it to fit inside of pre-bored out holes that are smaller then the cone diameter. Works very well on projects like spindles, dowels, pepper mills and much much more.
• ade from heavy duty steel for years of service. Available in MT1 and MT2 sizes which are both sold separately. Please check your lathes opening (Morse Taper) size. Morse Taper sizes vary from lathe to lathe. While the Morse Taper 2 size is more common, many of the smaller lathes today use the MT1 size. Please refer to your lathe owners manual for detailed information about your lathe.

HFS (R) Heavy Duty Live Tailstock Center (#2 Morse Taper)

• Size: #2 Morse Taper Cone is 2-1/2" by 1-11/16" overall diameter
• Application: Precision ball bearings for smooth, balanced turning. Ideal for many turn-between-center woodturning projects
• Note: Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included)
• Sturdy: Alloy steel shaft construction for ultimate strength and longevity
• Packing： Shipped in Protective case for storage

WEN LA1334 3/4-Inch MT2 Crown Revolving Live Center for Wood Lathes