Sometimes you may encounter White Screen issue on the screen during system startup. Thus, you will not be able to log in to your system. In extreme cases, you can no longer use it unless you find a permanent solution to the problem. Laptop white screen issue is often called white screen of death because the screen goes white and freezes. You may encounter this error even every time you start your system. Today we are going to tell you how to fix white screen on Windows 10 laptop.

How to Fix White Screen of Death on Windows Laptop

There can be various reasons behind the mentioned error, such as:

• Corrupt system files and folders
• Outdated Graphics Drivers
• Virus or malware in the system
• Problems in monitor cable/connectors, etc.
• VGA chip error
• Low voltage or motherboard issues
• Significant damage to the screen

Initial steps

If you are having a white screen issue with the screen, you may not be able to perform the troubleshooting steps because the screen is just blank. Thus, you need to get your system back to its normal working state. Let’s do it,

• Hold down the power key for a few seconds until your computer shuts down. Wait 2-3 minutes. Then press the power key again to turn on your computer.
• Or turn off the computer and unplug the power cable. After a minute, plug it back in and turn on your computer.
• Check and replace the power cable, if necessary, to ensure proper power to the desktop/laptop computer.

Method 1: Troubleshoot hardware issues

Method 1a: Remove all external devices

• External devices such as expansion cards, adapter cards or accessory cards are used to add functionality to the system via the expansion bus. Expansion cards include sound cards, graphics cards, and network cards and are used to enhance the functionality of those specific functions. For example, a graphics card is used to improve the video quality of games and movies. But, this can cause laptop white screen issue on your Windows 10 PC. Therefore, disconnecting all expansion cards from your system and replacing them, if necessary, can fix the problem.
• Also, if you have added external or internal devices and new connected devices, try disconnecting them.
• Also, if there are any DVDs, CDs or USB devices connected to your system, disconnect them and restart your Windows 10 PC to fix the laptop white screen issue. li>

Note: It is advisable to remove external devices very carefully to avoid data loss.

1. Navigate and select Safely Remove Hardware Iconand eject media on the taskbar.

2. Now right-click on it and select the option to eject the external device (such as Cruzer Blade) to remove it.

3. Similarly, remove all external devices and restart your computer.

Method 1b: Disconnect all cables/connectors

If there is a problem with the cables or connectors, or if the cables are old or damaged, the power, audio, and video connections will continue to disconnect from the device. Also, if the connectors are attached incorrectly, it may cause white screen issue.

• Unplug all cables, including VGA, DVI, HDMI, PS/2, Ethernet, audio, or USB cables from the computer, except the power cable.
• Make sure the wires are not damaged and in perfect condition, replace them if necessary.
• Always ensure that all connectors are firmly attached to the cable.
• Check connectors for damage and replace if necessary.

Method 2: Update/rollback graphics card drivers

Update or roll back your graphics card drivers to the latest version to fix white screen on Windows laptops/desktops.

Method 2a: Update the display driver

1. Click Windows Key and type Device Manager. Then click Open.

2. Double click Display Adapters to enlarge.

3. Next, right click on the driver (eg Intel(R) HD Graphics 620) and select Update Driver Software as shown below

4. After that, click “Search AutomaticallyAbout Driver Options to automatically locate and install the driver.

5y. Now it will Update Drivers to latest version, if not updated.

5 b. If they are already updated, the message, the best drivers for your device are already installed, will be displayed.

6. Click near the exit of the window. Restart your computer and check if you have solved the problem with your system.

Method 2b: Restore a monitor driver

1. Repeat steps 1 and 2 from the previous method.

2. Right-click your driver (eg Intel(R) UHD Graphics 620) and click Properties as shown.

3. Switch to the Driver tab and select Roll Back Driver as instructed.

Note: If the Rollback Driver option is not active on your system, this indicates that your system is running factory-produced drivers and has not been updated. day. In this case, perform method 2a.

4. Finally, click on “نعمIn the confirmation letter.

5. Click “OkTo apply this change and restart your computer for the restore to take effect.

Method 3: Reinstall the display driver

If the update or rollback does not provide a fix, you can uninstall the drivers and reinstall them, as shown below:

1. Launch Device Manager and expand the Display Adapters section using Steps 1 and 2 of Method 2a.

2. Right-click the display driver (eg Intel(R) UHD Graphics 620) and click Uninstall device.

3. Next, check the Delete the driver software for this device box and confirm by clicking Uninstall.

4. Wait for the uninstallation process to complete and restart your computer.

5. Now download the driver from the manufacturer’s website, in this case Intel

6. Run the downloaded file by double-clicking it and follow the on-screen instructions to complete the installation process.

Method 4: Windows Update

Installing new updates will help keep Windows operating system and drivers in sync. Thus, it helps you to fix white screen problem on your Windows 10 laptop or desktop.

1. Press both Windows + I keys together to open Settings in your system.

2. Select Update & Security, as shown.

3. Now click Check for Updates button as shown.

4A. If there are new updates for your Windows operating system, download and install them. Then restart your computer.

4 b. If an update is not available, the following message will appear.

Method 5: Repair Corrupt Files and Bad Sectors on Hard Drive

Method 5a: Use the chkdsk command.

The check disk command is used to find and repair bad sectors on a hard drive, if any. Bad sectors on your hard drive can prevent Windows from reading important Windows operating system files, resulting in laptop white screen error.

1. Click Start and type cmd. Then click Run as administrator , as shown.

2. Click “نعمIn the User Account Control“Confirmation.

dialog box.

3. Type chkdsk X: /f where it represents X The drive partition you want to scan, in this case C:

4. At the prompt to schedule the scan on next boot, press Y, then press Enter Key.

Method 5b: Repair corrupt system files using DISM and SFC

Corrupt system files can also lead to this problem. Therefore, running the Deployment Image Service & Management and System File Checker should help.

Note: It is recommended to run DISM commands before running the SFC command to ensure that it works properly.

1. Run Elevated Command Prompt management as described in Method 5a.

2. Here, type Given commands, one by one, and press the key. Enter to implement it.

DISM.exe /Online/Cleanup-image/Checkhealth
DISM.exe /online/Cleanup-image/Scanhealth
DISM.exe /online /Cleanup-image /Restorehealth

3. TypeSFC /scannow and press Enter. Let the scan complete.

4. Restart your computer as soon as the Verification 100% Complete message appears.

Method 5c: Recreate Master Boot Record

Due to bad sectors on your hard drive, Windows fails to start properly resulting in laptop white screen error in Windows 10. To fix this issue, follow these steps: p>

1. Restart the computer by pressing any Mission key to enter the advanced boot menu.

2. Here, click Troubleshooting, as shown.

3. Then click on Advanced options.

4. Select Command Prompt from the list of available options. The computer will restart.

5. Choose your account and enter your password on the next page. Click Continue.

6. Run the following commands one by one to rebuild the Master Boot Record:

bootrec.exe/fixmbr
bootrec.exe /fixboot
bcdedit /export X:\bcdbackup
attribute X:\boot\bcd -h -r -s
ren X:\boot\bcd bcd.old
bootrec/RebuildBcd

Note 1: In the commands, X represents the partition of the drive you want to scan.

Note 2: Type Y and press Enter when prompted to allow an installation to be added to the boot menu.

7. Now type exit and press Enter. Click Continue to start normally.

Method 6: Perform an automatic repair

Here’s how to fix Windows 10 laptop screen issue with automatic repair procedure:

1. Go to Advanced Startup > Troubleshooting > Advanced options By following steps 1-3 of method 5c.

2. Here, select Automatic Repair option, instead of Command Prompt.

3. Follow the on-screen instructions to resolve this issue.

Method 7: Perform a startup repair

Running Startup Repair from the Windows Recovery Environment is useful for fixing common errors related to operating system files and system services. Therefore, it can also help to fix the white screen on your Windows 10 laptop or desktop.

1. Repeat steps 1-3 for method 5c.

2. Under Advanced, click Startup Repair.

3. This will take you to the boot repair screen. Follow the onscreen instructions to let Windows diagnose and fix errors automatically.

Method 8: Perform a System Restore

Here is how to fix the white screen problem on your laptop screen by reverting the system to its previous version.

Note: It is recommended that you start your Windows 10 PC in Safe Mode before performing System Restore.

1. Click on Windows key and type cmd. Click Run as administrator to start Command Prompt with administrative privileges.

2. Type rstrui.exe and press a Enter key.

3. Now click Next on the System Restore window as shown.

4. Finally, confirm the restore point by clicking on the “Finish” button.

Method 9: Reset Windows

99% of the time, resetting Windows will fix all software-related issues, including virus attacks, corrupted files, etc. This method reinstalls Windows without deleting your personal files. So it is worth photographing.

Note: Back up all important data to an external drive or cloud storage before proceeding.

1. Type Reset in the Windows search bar. Click Open to launch the Reset this PC window.

2. Now click Get Started.

3. You will be asked to choose between two options. Choose Keep my files and proceed with the reset.

Note: Your Windows PC will restart several times.

4. Follow the onscreen instructions to complete the process.

We hope this guide was helpful and you were able to resolve Windows 10 laptop white screen issue. If it is not resolved yet, you will need to contact your authorized service center. manufacturer of your laptop/desktop computer. If you have any other questions or suggestions, feel free to leave them in the comments section below.

All the tips mentioned here are informative and have been translated from foreign websites, and it is necessary to consult the specialists see page

Notice of copyright of Ahlaom.com