Are you looking for the Stock Rom firmware for your device Kenbo E42? If yes your answer, you are on the right page. We have given the direct link to download Kenbo E42 firmware.

Download Kenbo E42 stock ROM from here, flash it on your device and enjoy the native Android experience again. The download file contains the flash tool and the firmware file.

Download Jiake T2 Firmware

Stock ROM File Name: Kenbo_E42_06032015.zip
Stock ROM File Size: 17.6 MB
Android OS Version: NA

Download Now

How To Flash Stock ROM Firmware On Kenbo E42

Step 1: To get started, download the stock ROM zip file given above and extract it on your computer. You will find SWDownloader flash tool and firmware file after extracting.

Step 2: Now download Kenbo E42 USB driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.

Step 3: Next, switch off your Kenbo E42 device and remove the battery (if it is removable).

Step 4: Now go to the extracted folder in Step 1 and open up the Flash Tool sub-folder. You will find “SWDownloader.exe” file in it. Launch it.

Step 5: Next, click on “Browse” button under “Download Directory” and choose the extracted folder from Step 1.

Step 6: Now select Chipset of your device under “Chipset“. Once done, click on “Settings” and choose the “NV” and “EFS” folders respectively (both of them will be available in the extracted folder from Step 1.

Step 7: Next, save the settings and click on “Start Download” button to launch the firmware flashing process.

Step 8: It will take few minutes for the flashing process to get completed and once it does, you will get “Success” message. Now you can unplug your device from the computer.

That’s it. Now you have successfully flashed Stock Rom Firmware on your Kenbo E42 Android device. If you encounter any issues while following this tutorial, do let me know via comments.

The post Kenbo E42 Firmware appeared first on Android Stock ROM.