Introduction

A thorough understanding of Network structure and devices is essential for network engineers and administrators. The devices that are part of a network as well as the interfaces, protocols, and settings each one uses, must all be understood. This data may help with troubleshooting, boost performance, and keep the network safe. But where may one get this information? That's where CDP comes into action. In this blog, we will explain what is CDP in networking, why it is necessary, how it works, and its benefits and drawbacks.

What is CDP in networking?

CDP stands for Cisco Discovery Protocol. It is a Cisco proprietary protocol used in local networks to gather data about Cisco devices. CDP is used for network management and troubleshooting purposes.

With the help of CDP, one can use various commands to get information about the connected devices. Information like IP address, hostname, platform, software version, local and remote ports, capabilities, and VLAN membership.

Now, the question that arises is why we need CDP. Let's understand in detail.

Why Cisco Discovery Protocol is needed?

CDP in networking is needed for a variety of purposes. These are:

• Each Cisco device in a network may be identified by its type and model using CDP. For example, one can use commands such as "show cdp neighbors" to get an idea about the number of devices connected. If anyone wants to see the details about a specific device, use the command "show cdp entry".
• Each Cisco device in a network may be identified by its type and model using CDP.
• Each Cisco device in a network may have its configuration and status verified using CDP.
• CDP makes discovering each Cisco device's IP address inside a network easier.
• Each Cisco device in a network may have its VLAN membership determined using CDP.
• Any disparity or consistency between nearby devices may be found using CDP.
• CDP aids in resolving connection problems between adjacent devices.
• The network architecture and inventory are better documented using CDP.

We have covered the basic explanation about "What is CDP in networking" and why it is needed. Now, let's focus on how CDP actually works.

How does the Cisco Discovery Protocol work?

Sending and receiving periodic messages across nearby Cisco devices is how CDP operates. The messages provide details about the sender device's interfaces. The messages are transmitted to a multicast destination address (01:00:0C:CC:CC:CC) while being encapsulated in SNAP headers every 60 seconds by default. Only the Cisco CDP-enabled devices received the messages.

The local interface, hold time, capability codes, platform type, and port ID of the sending device are all stored in a database by each device that receives a CDP message. One can easily see the table via the command "show cdp neighbors". Every time a new message is received, or a previous message expires, the table is updated. The "clear cdp table" command may be used to manually clear the table as well.

The default behavior of CDP may be altered by configuration. For instance, CDP may be turned on or off per interface or globally. Additionally, CDP may be configured to modify the default interval and hold time for sending and receiving messages. Additionally, CDP may be set up to filter the data that each device sends or receives. CDP may also be set up to relay messages to other unconnected devices.

Now we have a basic understanding of how CDP works, let's understand what information CDP discovers.

What Information does Cisco Discover Protocol Discover?

Below, we have explained the information CDP can discover in a tabular form.

Below, we have explained the benefits and drawbacks of using CDP.

Benefits of CDP in Networking

CDP offers various benefits, some of these are:

• It does not need any configuration or authentication and is simple to use.
• For network administration and troubleshooting reasons, it offers useful information.
• Without using dynamic routing technologies, it offers on-demand routing for simple networks.
• The topology and configuration of a network may be found out and verified with the aid of CDP.
• CDP assists in resolving connection and performance problems among neighboring devices.

Drawbacks of CDP in Networking

Apart from all the benefits CDP can provide, there are some drawbacks. Some of the drawbacks are:

• Since CDP is a Cisco proprietary protocol, not all products made by other manufacturers fully support it.
• CDP doesn't provide message encryption or authentication since it acts at the data connection layer.
• Anyone with access to CDP may see sensitive information about Cisco equipment and their user interfaces.
• Each device that sends and receives messages over CDP uses CPU and bandwidth resources.

These are the advantages and disadvantages of CDP in Networking.

Frequently Asked Questions

Q1 - What is CDP and its function?

CDP stands for Cisco Discovery Protocol and is a network protocol that allows devices to discover and share information about each other. CDP can provide details such as device type, IP address, platform, and capabilities.

Q2 - What is CDP and LLDP?

CDP and LLDP are link layer protocols that help devices discover their neighbors and capabilities. CDP stands for Cisco Discovery Protocol and is Cisco-specific, while LLDP stands for Link Layer Discovery Protocol and is an open standard.

Q3 - Where is CDP used?

A Cisco proprietary protocol called CDP is used to gather data on devices that are directly linked to one another, including hardware, software, device name information, and many other things. Mainly, there are two versions, i.e., CDPv1 and CDPv2.

Q4 - Is CDP only for Cisco?

The proprietary Cisco Discovery Protocol (CDP) lets Cisco devices find and exchange information. It's just Cisco and a few third-party devices that enable CDP. CDP is not standard and cannot be utilized by non-Cisco devices.

Conclusion

A network protocol called CDP was developed by Cisco Systems and works at the OSI model's data link layer. On the majority of Cisco equipment, it is a network discovery protocol that is turned on by default. Network administration, troubleshooting, and documentation all make use of CDP. It aids in figuring out and confirming a network's topology and configuration. Before adopting CDP, users should be aware of its drawbacks and limits.