Are you looking for best Oxygen Sensor offset puller, we’ve consulted top experts who has in-and-out knowledge about the oxygen sensor offset puller. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best oxygen sensor offset puller.
This list is undoubtedly the best oxygen sensor offset puller available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good oxygen sensor offset puller, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a oxygen sensor offset puller.
Best oxygen sensor offset puller – The Winners!
Bestseller No. 1
Offset Oxygen Sensor Socket, 3/8-Inch Drive,...
Bestseller No. 2
AP1822F 3/8-inch Drive by 7/8-inch (22mm) Offset...
Bestseller No. 3
5 PCS Automotive O2 Oxygen Sensor Socket Offset...
But these three has some more compitions too, Check out below List of Top 10 best oxygen sensor offset puller.
If you are ready to choose a new oxygen sensor offset puller, check out our recommendations for the best oxygen sensor offset puller. But if you’d like to learn more about the various types of oxygen sensor offset puller available and how to choose the right one for you, read on.
| # | Preview | Product | |
|---|---|---|---|
| 1 | Offset Oxygen Sensor Socket, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side,... | Check Out Price | |
| 2 | Oxygen Sensor Socket with Side Wire Cutout 3/8” Inch Drive x 7/8” (22mm) fits All Vehicle O2... | Check Out Price | |
| 3 | 5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool | Check Out Price | |
| 4 | T2278F 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket | Check Out Price | |
| 5 | TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749, Original Version | Check Out Price | |
| 6 | GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720 | Check Out Price | |
| 7 | 1 Pcs Offset Oxygen Sensor Socket 3/8-Inch Drive by 7/8-Inch 22mm Wire Gate Accesses Sensor from... | Check Out Price | |
| 8 | ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover tool and Thread Chaser Set | Check Out Price | |
| 9 | GOHAWKTEQ Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs | Check Out Price | |
| 10 | ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket - Wire Gate Accesses Sensor... | Check Out Price |
List of Top 10 Best oxygen sensor offset puller In Detailed
Bestseller No. 1
Offset Oxygen Sensor Socket, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Cars
- PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function. The tool meets and exceeds ANSI/ASME standards.
- DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8" drive oxygen sensor socket is also offset and compact, providing extra leverage even in hard-to-reach locations.
- FEATURES: 7/8" (22mm) socket fits most oxygen sensors, works with any 3/8" drive ratchet or breaker lever, offset drive gate with wire links the sensor from the side to prevent damage to the wires.
- FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this quality tool will save you time! to help your car's emissions and fuel consumption.
- WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time, we will reply you within 24 hours.
Bestseller No. 2
Oxygen Sensor Socket with Side Wire Cutout 3/8” Inch Drive x 7/8” (22mm) fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket
- Quality- Constructed with drop forged heat-treated chrome-vanadium steel (CR-V) for strength and longevity; Black phosphate finish for corrosion resistance.
- Size- Fits standard oxygen sensors with a 7/8” hexagon nut; 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet.
- Design- The size of the open side is 8 mm, the length: 80mm, Side cutout prevents damage to wires
- 100% Brand new and Never used. This part Is guarantee By Factory Warranty
- Warranty: We offer 30 days free return and 365 days free warranty. Please feel free to let us know if you need any assists.
Bestseller No. 3
5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool
- 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
SaleBestseller No. 4
T2278F 3/8-Inch Drive by 7/8-Inch (22 mm) Offset Oxygen Sensor Socket
- Size: Common 6 point, 7/8 inch (22 millimeter) hex fits almost all oxygen sensors; 3/8" drive for ratchets.
- Quality: T2278F Oxygen Sensor Wrench is a heavy-duty tool which is made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
- Design: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the unique off set design of the T7822F Oxygen Sensor Wrench delivers maximum torque with maximum convenience! Made to increase torque on hard-to-remove O2 sensors and allows you to access tough spots, easily!
- Using: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- Warranty: 100% Satisfaction Guarantee, As with all of our products, you are covered. If you don't like it, just return it and get a full refund. All we wanna do is to make you satisfy the wrench and the service we provide for you.
Bestseller No. 5
TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749, Original Version
- Removes and installs oxygen sensors on vehicles with computer-controlled engines
- Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors
- Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires
- Use with any 3/8 inch drive ratchet or breaker bar
- High-performance chrome molybdenum steel construction
Bestseller No. 6
GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720
- Gearwrench's Sensor and Sending Socket Set is designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches
- Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units
- Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units
- Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units
- Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit
Bestseller No. 7
1 Pcs Offset Oxygen Sensor Socket 3/8-Inch Drive by 7/8-Inch 22mm Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Models of Cars Oxygen Sensor Offset Puller
- Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors. Use with any 3/8 inch drive ratchet or breaker bar. It’s very handy.
- The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots. This quality tool can save your knuckles and time！
- This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
- Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- Thank you!
SaleBestseller No. 8
ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover tool and Thread Chaser Set
- Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
- 3 types of universal socket wrenchs cover various situations of oxygen sensor location
- 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
Bestseller No. 9
GOHAWKTEQ Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs
- Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines.
- Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance.
- Design: Special side cutout design allows easy access to oxygen sensor from section and prev
