Materials

•  High Volts photons laser [550 volts] 
•  600 volts AC source.
•  Frequency radiation[exceeding 400 KV/m].
•  440Ah-lambency.
•  Oxygen gas {2-cylinders}.
•  Cryogenic engine.
•  Triatoma (O3, ozone).
•  Solar ultraviolet radiation [600w+] for emergency
•  Dilation mechanism.
•  Transition Metal.
•  Metallic, organic and polymeric.
•  Aluminum or plastic for dial.
•  Electronics breadboard with clips.
•  High Voltage regulator and discrete electronics.
•  Counter integrated circuits.
•  Large quartz crystal.
•  Quartz and 350 volt battery pack.

NOW YOU FIX THESE MATERIAL WITH GIVEN INSTRUCTION.

•  Create an external machine first using transition metal. Then fix the machine's two oxygen O2 gas 2 cylinders in two sides.
•  When your machine battery is loss, solar panel will be help to charge the battery so, fix the solar panel on the top solar ultraviolet radiation [600w] for emergency.
•  An enable the quartz and 350 volt battery pack on the bottom of the machine.
•  The wood to cover on the battery. Because of battery leakage two current collectors, a cathode, a separator, an electrolyte, and an anode (positive and negative).
•  And fix the large quartz crystal Silica makes up the hard, crystalline mineral known as quartz. (silicon dioxide). With each oxygen being shared between two tetrahedrons, the atoms are connected in a continuous framework of SiO4 silicon-oxygen tetrahedrons, giving the material its overall chemical formula of SiO2. After feldspar, fix the next layer with large quartz crystal.
•  Next enable the high Voltage regulator and discrete electronics. And fix the connection. Having the ability to individually control the maximum voltage and current makes a good supply excellent for charging batteries. The output voltage of the supply will decrease while the battery charges if the battery (or cell) is entirely depleted, and it will rise if the charge current is restricted to a safe level.
•  Once the battery has been charged sufficiently, the voltage will stay constant and the current will decrease as the battery gets closer to being fully charged.
•  And inset counter integrated circuits. The circuit to save power if you are working on any application, such as a Shadow Counter or another, that does not require fast speeds. However, it is advised to use a TTL counter rather than a CMOS one if you want to make use of this circuit for any high speed applications, such as a speed calculator that uses a pulse counter. Clock pulses are produced by the counter at the output. After that, fix Electronics breadboard with clips. Connect the red lead of the battery pack to the Electronics breadboard.
•  Connect the black lead of the battery pack to the ground Electronics breadboard with clips.
•  Connect the Electronics breadboard with clips. To the resistor coming from hole B12.
•  Place the four pushbutton pins into the corresponding holes E10, F10, E12, and F12.
•  Enable the triatoma (O3, ozone).frequency dependent antisymmetric. That are symmetric and periodic frequency-dependent symmetric transversal vibrations.
•  Cryogenic liquid to connect with sensor. And combine the Cryogenic liquid into liquid nitrous. Capacitance-based liquid cryogenic level sensors from magnetic are appropriate for detecting liquid nitrous in laboratory environments. See our Liquid Helium Level Sensors for measurements of liquid helium.
•  Fix the lambency. The lambency of the sunlit stained-glass window was breathtaking. And connect high volts photons laser.[550 volts]. A source of 600 volts AC.
•  High frequency radiation[exceeding 400 KV/m]. A high frequency radiation to moved on fourth dimensions.
•  A time travel machine will work with functioning of Dilation mechanism, To travel present to past to future.

• IT IS THE PROCESS OF MAKING A TIME TRAVEL MACHINE.

• ENTER INTO FOURTH DIMENSION.