The error code on 5255 – OXD30041DO KERNEL_EXEC_ST pops up to indicate an issue with the connected internet service. The resolution for this error is to reset the internet settings and disable certain protocols in them.

Resolution for the error

1. Turn on the HP OfficeJet 5255 printer by connecting it to a power cord.
2. Ensure that the router is turned on and is connected to a working network connection.
3. Check if the printer and router are connected without any interruption.
4. Tap on the settings option in your printer’s control panel.
5. Navigate to the Network Settings option in the control panel.
6. Look for the Advance settings option.
7. Select the option and locate the IPv6 option.
8. Turn off the IPv6 feature and restart the printer.

Steps to Resolve OXD30041DO  KERNEL_EXEC_ST error on HP OfficeJet 5255

1. The HP OfficeJet 5255 printer might encounter the OXD30041DO  KERNEL_EXEC_ST error upon operation. This issue commonly arises with the printers connected over a wireless connection.
2. Look whether the connection between the printer and the router is proper. Ensure that the printer is connected to the correct network router.
3. Check for any overlap in the network routers if more than one are placed in the same location. Try turning off the other network routers and connecting the printer again.
4. Disconnect the power cord and restart the device after a few minutes of rest. This process acts as a basic printer reset to resolve common issues in it.
5. Open the printer settings from the control panel. Locate the settings icon in the control panel and touch it. See the list of options and locate the Network Setup option.
6. Touch the Network Setup option and scroll down the list that pops up. Look out for the Advance Settings option from the list. Touch the option and open the available settings for alteration.
7. Look for the IPv6 option in the list. The IPv6 enabled devices face this issue on a regular basis. Disabling this feature will stop the error from arising often.
8. Slide the bar next to the IPv6 option and disable it on the printer. The error will now get automatically resolved in this process.
9. Turn off the printer and restart it using the power button. Leave the device to rest for a while before restarting it.
10. Establish a connection to the wireless network and start printing again.