Parts Breakdown
Identifying the parts of your swimming Pool before the installation process will make the installation a lot easier and go more smoothly. Below you will find a breakdown of the parts that are used on our Saltwater 8000 Round Above Ground swimming pool and where they are used and installed.
Top Ledge – Index #L
The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 8″ wide and are located at the very top of your pool.
Material: Injected-molded Resin
| Ref # | Description | Part # | Length | 12' | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F | Top Ledge | 10102350000 | 56" | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Top Track – Index #A
The Top Tracks (sometimes referred to as Inner Stabilizers) are the resin tracks that hold the liner onto the pool wall.
Material: Resin
| Ref # | Description | Part # | Length | 12' | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | Top Track | 1071507160000 | 56" | 8 | 10 | ||||||
| 1072407160000 | 56" | 12 | 14 | 16 | |||||||
| 1073007160000 | 56" | 18 | 20 | 22 |
Top Caps – Index #G
The Top Caps consists of (2) parts. There is an Top Cap/Front Part which is closer to the outside of the pool. The Top Cap/Back Part is installed on the inside of the swimming pool closer to the water. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| G | Top Cap/Front Part | 10302350000 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
| G | Top Cap/Back Part | 10302350010 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Top Cap Cover Plate – Index #H
The Top Cap Cover Plates cover where the Top Caps screw into the Top Joiner Plate.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| H | Top Cap Cover Plate | 10302350030 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Top Joiner Plate – Index #I
The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| I | Top Joiner Plate | 11102350000 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Upright – Index #E
The Uprights are the vertical posts on the outside of your swimming pool wall.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| E | Upright | 10202350004 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Bottom Joiner Plate – Index #J
The Bottom Joiner Plates connect your Bottom Tracks together on a round pool and on the curved sides of an oval swimming pool. Your curved side uprights will also clip into the Bottom Joiner Plates.
| Ref # | Description | Part # | 12' | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| J | Bottom Joiner Plate | 11202350000 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Bottom Track – Index #B
The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.
The Bottom Track inserts into the Bottom Joiner Plates on the curved sides of the swimming pool and Bottom Straight Side Track Connector the straight sides.
Material: Resin
| Ref # | Description | Part # | Length | 12' | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|---|
| B | Bottom Track | 1081507000000 | 56" | 8 | 10 | ||||||
| 1082407000000 | 56" | 12 | 14 | 16 | |||||||
| 1083007000000 | 56" | 18 | 20 | 22 |
Coping Strips – Only Included with Overlap Liners
An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping strips are only included if you chose an Overlap Liner. Coping Strips are not required when installing a Uni-Bead Liner.
About The Pool Factory
America’s Above Ground Pool Experts – is the best place to find everything you need to make owning a swimming pool or spa fun and easy, at the best prices today. With a combined 50+ years of experience The Pool Factory employs a highly trained staff of above ground and semi inground pool specialists. The Pool Factory can provide unique solutions for all pool supplies and swimming pool needs.
Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Saltwater 8000 Round Swimming Pool.
This post first appeared on America's Above Ground Pool Experts - The Pool Fac, please read the originial post: here
