Parts Breakdown
Identifying the parts of your Pool model before you begin your installation will make the process of assembling the swimming pool much easier. Below you will find a complete breakdown of the parts and components for the Quest Round Swimming Pool Model.
Top Ledge – Reference #6
The Top Ledges (sometimes referred to as Top Rails) are the top finishing components of the swimming pool that are placed between the vertical upright posts. The Top Ledges are 8″ wide and are located at the very top of your pool.
Material: Resin
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| 6 | Top Ledge | 19233 | 55-13/16" | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Top Track/ Inner Stabilizer – Reference #1
The Top Track Stabilizers are the tracks/rails that stabilize the top of the pool wall.
Material: Aluminum
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Top Track (Inner Stabilizer) | 10307 | 53-1/4" | 11 | ||||||
| 10308 | 54-1/8" | 13 | ||||||||
| 10309 | 54-7/16" | 15 | ||||||||
| 10310 | 52-1/4" | 18 | ||||||||
| 10311 | 52-7/8" | 20 | ||||||||
| 19070 | 51-1/4" | 23 | ||||||||
| 12269 | 53-3/8" | 24 |
Top Caps and Upright Collars – Reference #9 & #10
The Top Cap consists of (2) parts. There is a Top Cap which goes over the Top Joiner Plates and the Upright Collar which is installed on the outside of the swimming pool. The Top Caps cover all of the hardware where your Top Ledges screw into the Top Joiner Plates.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 9 | Top Cover | 19612 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
| 10 | Upright Collar | 19613 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Screw Covers – Reference #11
The Screw Covers are installed on the Upright Collars concealing the hardware.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 11 | Screw Cover Left | 19765 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
| 11 | Screw Cover Right | 19766 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Top Joiner Plates – Reference #3
The Top Joiner Plates are screwed in at the top of every Upright. Your swimming pool’s Top Ledges will be screwed into these Top Joiner Plates.
Material: Galvanized Steel
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 3 | Top Joiner Plate | 19164 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Uprights – Reference #5
The Uprights are the vertical posts on the outside of your swimming pool wall. Each upright post connects to the bottom and top joiner plates with screws.
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| 5 | Upright | 21509 | 53-13/16" | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Bottom Joiner Plate – Reference #4
The Bottom Joiner Plates connect your Bottom Tracks together on a round pool. Your uprights will also screw into the Bottom Joiner Plates.
Material: Resin
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 4 | Bottom Joiner Plate | 19092 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Upright Boot – Reference #8
The Upright Boots are the decorative pieces that screw into the bottom of your Uprights.
| Ref # | Description | Part # | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|
| 8 | Upright Boot | 19615 | 10 | 12 | 14 | 16 | 18 | 20 | 22 |
Coping Strips – Reference #7
An Overlap Pool Liner is installed by overlapping it over the pool wall and using plastic Coping Strips to hold it in place. Coping Strips are not required when installing a Uni-Bead Liner, but they are included with the swimming pool. If using a Uni-Bead liner you can discard the coping strips.
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| 7 | Coping Strips | 10296 | 48" | 12 | 14 | 16 | 19 | 21 | 24 | 25 |
Bottom Track – Reference #2
The Bottom Track (sometimes referred to as Bottom Rail) is where your pool wall sits.
The Bottom Track inserts into the Upright Boots on the swimming pool.
Material: Resin
| Ref # | Description | Part # | Length | 15' | 18' | 21' | 24' | 27' | 30' | 33' |
|---|---|---|---|---|---|---|---|---|---|---|
| 2 | Bottom Rail | 12312 | 54-1/4" | 10 | ||||||
| 12321 | 54-1/4" | 12 | ||||||||
| 12322 | 54-1/4" | 14 | ||||||||
| 12323 | 54-1/4" | 16 | ||||||||
| 12324 | 54-1/4" | 18 | ||||||||
| 12325 | 54-1/4" | 20 | 22 |
About The Pool Factory
America’s Above Ground Pool Experts – is the best place to find everything you need to make owning a swimming pool or spa fun and easy, at the best prices today. With a combined 50+ years of experience The Pool Factory employs a highly trained staff of above ground and semi inground pool specialists. The Pool Factory can provide unique solutions for all pool supplies and swimming pool needs.
Click on the tab below to view the Manufacturer’s Installation and Safety Instructions for the Quest Round Swimming Pool.
This post first appeared on America's Above Ground Pool Experts - The Pool Fac, please read the originial post: here
