IN the past, the favoured methods of stripping paint from Alloy Wheels has been either by shot blasting (expensive) or using solvent-based and highly acidic paint strippers (very dangerous to use and now the subject of a Europe-wide trade ban due to an EEC ruling).

Biostrip Alloy Wheel Cleaner is a safer, fast alternative

The product is very effective at stripping a wide variety of paints and laquers from alloy wheels, and the process couldn't be quicker or easier.

Stripping Alloy Wheels with Biostrip:

• Immerse the wheel in the Biostrip solution, at 60 C or above  for two to three hours (might take slightly longer depending upon wheel manufacturer)

• Once immersed, the fast-acting fomula will begin working immediately  to remove the top coat  from the wheel, once removed it will start work on the notoriously difficult OEM primer.
  

• The paint will be removed in large sheets which can be filtered or strained from the stripper solution
  

• All that remains is to rinse the wheel, wipe it clean, and it's ready to repaint

NOTE:

OEM primers will not normally strip below temperatures of 60C

Do NOT strip steel parts alongside alloy wheels.

Benefits of stripping your Alloy Wheels with Biostrip: 

• Takes as little as 2 HOURS to strip

• No need for costly additives
  

• Contains no methylene chloride

• Zero sludge formation; so no costly filter press required
  

• Paintwork peels off in strips