Among all the flooring options, 3D flooring design gives your interior great effects, 3D bathroom floor murals, kitchen 3D floors, living room floor designs bring life to your interior - self-leveling floor compound
Perhaps this is the only weak point of the self-leveling floor - it should be protected from scratches and scuffs. Of course, they will not violate its technical properties - but the appearance of a photo can spoil it.
Among all the options, perhaps, self-leveling Floor compound or as it called 3D flooring and 3D floor murals is the best-fit as a floor covering in the bathroom.
As you know there is a very high moisture content, which makes a lot of problems, such as the floor surface, the 3d wall paneling ideas, and ceiling design ideas.
Therefore, in the choice of material for the 3D bathroom floor murals, everything should be approached very seriously. As for the self-leveling 3D floors, this decision will be an effective obstacle to the adverse effects of moisture. 3D flooring technology is now widely used not only in residential and industrial style premises.
3D flooring advantages and disadvantages
The advantages
- Absolute invulnerability coverage. It is almost impossible to scratch or damage. For this, you need to make great efforts. Based on this advantage, the self-leveling floor is quite popular in kids rooms, so that kid can play and play pranks in their room without harming the apartment.
- Almost complete lack of wear.
- Easy to clean. The bulk floor is absolutely smooth, in which there are no bumps or cracks. Therefore, under the cleaning of the coating created according to this principle, simple washing with a damp cloth is accepted.
- High-speed 3d floor production. Creating materials for self-leveling coating is much faster than the production of laminate or parquet.
- Colossal decorative features that allow you to realize any ideas. Image selection is limited only by the imagination of the designer or the owner of the room.
- The possibility of combining with a warm floor.
- Environmental friendliness
- Fire resistance surface
- Lack of seams and joints
The disadvantages
- The polymer coating dries long enough. After it has been poured, it is necessary to wait up to 5-7 days until the screed completely hardens (in case of low room temperature and high humidity, this period may increase).
- The high cost of materials.
- Periodically clean the floor with special products to maintain a glossy shine for a longer period.
- In the case of the uneven floor in the apartment is required to prepare the base for the bulk mixture.
- The 3d effect will be visible from a certain point. In other planes, the 3d image will look like a regular image.
What is a 3D flooring?
A 3D floor is a seamless floor covering consisting of three components: a base layer, a picture (the image is applied using paint or other material) and a finishing layer, and the process of its formation are not very different from the technology of laying a bulk floor covering.
You will be able to create a similar three-dimensional image in your apartment with your own hands, but for this, you will have to show endless patience. In addition, you will need about two weeks of time, a substantial amount of money for materials and your imagination.
If you agree to bring the above-mentioned victims to the altar of home improvement, then, first of all, find out what materials and tools will be needed.
What do you need to do your own 3D flooring?
Instruments:
- machine for grinding concrete floors;
- construction mixer or drill with power from 800 W;
- vacuum cleaner (home - for small cultivated areas, industrial - for large);
- spatulas (flat and notched rakia, length 20-80 cm);
- roller (fur and needle), flat brush;
- rubber gloves.
Materials:
- cement;
- an aqueous solution of PVA dispersion (one liter of PVA to 10 -15 liters of water);
- materials for decoration (depending on the selected design). This can be an image on a vinyl film; for hand-painted, acrylic paints, a vinyl stencil, dry and clean fine decor (pebbles, coins, sand, etc.) will be needed;
- epoxy resin and hardener or a ready-made combination of these components - compound.
After we have stocked the necessary tools and materials, it's time to think about the stages of the work ahead.
How to keep the 3d floor clean?
It is quite easy to care for a self-leveling floor - it is not capricious and does not require any special cleaning products. The only important point - you should not wash such a floor with powders, because they can scratch a smooth surface.
Perhaps this is the only weak point of the self-leveling floor - it should be protected from scratches and scuffs. Of course, they will not violate its technical properties - but the appearance of a photo can spoil it.
It is hard to disagree that with an impressive list of advantages and just one drawback of a 3D floor, it’s really both beautiful and a convenient flooring option for any home.
How to choose the colors of 3D flooring designs
Professional designers of 3D flooring designs believe that it is not necessary for the 3D floors to use a lot of colors but opt for a neutral color.
For example, if you want to highlight some areas in the bathroom, bright color of the 3D bathroom floor does not allow to do this, because the viewer's attention will be directly riveted to the 3D floor murals.
But if the floor will be the second plan, like the background, the perception of the overall situation will be much better.
Despite the recommendations, many people still take risks and dare to use bold colors in the installation of 3D bathroom flooring.
Modern fashion trends focus on bright and rich colors. No one is forcing consumers to choose certain 3D floors, it can be done in several colors, and if desired, even with the presence of the figure. The most important condition - all the interior details must comply with the same style.
Poured floors are coated with fine 3D floor patterns is often used to give the room a kind of uniqueness, and underscores the status of its owner.
3D flooring structure built on a combination of the filler to the polymer solution composition and the printed image which represents the final 3D floor designs. the printed 3D images are placed on the concrete foundation and from the top transparent compound is poured in big amounts.
