Photovoltaic modules are install differently depending on the accessories: on rails over the bricks, on an underlay or a seal frame. The frames are usually made of zinc, lead or plastic. Discover different Installation methods for solar panels.

Important properties

• Covering the roof at the installation site of the solar panel
• Installation of bezels (bottom and sides)
• Installation of the underlay or waterproofing system
• Installation of the rails and panels, connection of the current transformer to the grid
• To the solar stand-alone systems
• Installation types of photovoltaic systems

Solar Panel Sydney

are mainly install on roofs (inclination from 30 to 35 degrees and preferably facing south). Their fastening systems are different and are therefore more or less easy to install. The necessary accessories, the duration of the work, the necessary skills and safety precautions and the tools require for the installation of Solar Panel Sydney must also be taken into account. From the rails install over the tiles or Roof truss to installing a waterproofing system or roofing membrane, costs vary significantly. The installation of solar panels enables the production of electricity, their installation is different depending on the species. The solar panels must be selected with particular care and according to certain criteria that can be determine as part of a needs analysis.

Installation of solar modules on mounting rails

Work steps

• Covering the roof at the installation site of the solar system
• Installing the bezel (bottom and side)
• Installation of the underlay or waterproofing system
• Installation of the mounting rails and panels
• Installation of the current transformer with the network
• Discover the Monomania catalog
• Electrical cables
• Installation of a PV system in 5 steps

Covering the roof at the installation site of the solar system

A distinction is made between two different cases. If the roof is cover with tiles or slate shingles, you will need to partially remove them. Start by identifying the exact installation location where you plan to install the solar panels. Solar companies in Australia provide the facility to remove the roof tiles from an area slightly larger than the panels to be install.

Once this process is complete, your roof will have a hole after careful preparation, the photovoltaic panels will be place there.

Cover the roof with protective gloves as the tiles have sharp edges and can injure your hands. Any intervention on the roof must be carry out using a fall arrest system (fall arrest net or safety line with harness). When covering at the ridge, be careful not to destroy the ridge tiles or half battens (don’t step near them and carefully lift the tiles).

Bezel Installation (Bottom and Side)

Solar Panel in Australia consists of connectors between your roof’s decking materials, in your case tiles or slate shingles, and the various elements that protrude from the roof, here the solar panels and their attachments. They enable the perfect seal. There are edging sheets that are suitable for all roof tiles, and these are also available in different shapes and colors.

Installation of the edging sheet consists of fastening with screws to the existing roof battens or to additional wooden battens. The use of a screwdriver and a measuring tape is necessary to be able to take the exact measurements. The hooks are also attach with screws.

If necessary, add a batten along the length of the panels behind the first row of roof tiles. This will give you height and provide a better base for the edging panels. The edging can be plastic and supplies with the kit, or it can be a lead tape unrolle onto the previously install batten and first row of tiles. The lead tape is glue with silicone glue, which is apply with a caulking gun. The lead strip, which can be shape by hand, adapts to the shape of the roof tiles. Boards and battens are cut with a circular saw.

The post Installing a Solar Panel in your Homes appeared first on VEDAMALHAR.