If your Oven is not working, it can be a major inconvenience and disrupt your meal plans. Whether you’re trying to bake a cake for a special occasion or just cook a simple meal for your family, an oven that won’t turn on or heat up can be a major headache. However, there are a few simple steps you can take to troubleshoot and fix the issue yourself, saving you the time and expense of calling a professional appliance repair service.

Step 1: Check the Power Supply

The first thing you should do if your oven is not working is to check the power supply. Ensure that you have plugged the oven in with an outlet and ensure the circuit breaker has not been tripped. If the breaker has tripped, flip it back on and attempt to plug the oven back in. If the oven still does not turn on, try plugging in a different appliance to the outlet to make sure the outlet is functioning Properly.

Step 2: Check the Controls

Before moving on to the dishwasher controls. Ensure that your oven is connected to the outlet and set to the proper temperature. To ensure that automatic cooking is taking place and that the controls are set. Ensure that the correct selection has been made. If the oven is set to the wrong temperature or cooking function, it will not turn on or heat up properly. If the controls seem to be set correctly, try turning the oven off and then back on again to see if that resolves the issue.

Step 3: Check the Door

If the power supply and controls are both working properly, the next thing you should check is the Door. Make sure the door is closed fully and that it is properly aligned with the oven before it will get cooking. If the oven door isn’t closing properly. It may not be functioning properly due to its broken hinges or a worn out seal. In this case, you will need to fix the door in order to get the oven working properly again.

To fix a damaged door hinge, you will need to remove the door from the oven and replace the hinge. This will typically require removing a few screws and bolts, so you will need a screwdriver and possibly a drill. After you have removed the old hinge, you can install the new one by reversing the removal process. Make sure the new hinge is properly aligned and tightened down. A0s a misaligned or loose hinge can cause problems with the door closing properly.

To fix a worn out door seal, you will need to remove the old seal and install a new one. This process will also typically involve removing a few screws and bolts. So you will need a screwdriver and possibly a drill. Once the old seal is removed. You can install the new one by carefully aligning it with the door and securing it with the screws and bolts. Make sure the new seal is properly seated and tightened down. As a misaligned or loose seal can cause problems with the door closing properly.

Step 4: Check the Heating Element

If the door is closing properly and the oven is still not working. The next thing you should check is the heating element. The heating element is accountable for warming the oven to a specific temperature, so in case it is not working. The oven will not be able to heat. You can check the element by looking at it through the oven window. If it is not glowing red, it may be broken and will need to be replaced in order to fix the oven.

To replace the heating element, you’ll have to take the bottom part apart.

Conclusion

There are many reasons or sources of possible problems why an oven is not working. Basic problems can be resolved if you read the user manual instructions troubleshooting guide. However if the issue cannot be resolved with the basic troubleshooting guide outlined by the manufacturers user manual then to get your oven repair you would need to contact a reputable Appliance Repair Service provider to help you diagnose and repair the problem you had with your oven.

The post Oven Not Working? Troubleshooting and Fixing Tips appeared first on ADVANCE Appliance Ltd ™ Appliance Repair.