The question of how to make Pebbledash look good is a common one across the UK, with millions of homes now covered in what can often be dated finish. In this guide we are going to cover everything you need to know before deciding whether to paint or re-render your house.

 

What Is Pebbledash?

 

Pebbledash is a form of render that was popularised in the 1920's, involving covering an exterior wall with small pebbles and stones. This can often be confused with a roughcast, which is a similar textured render. While pebbledash is applied by adding a render mix to a masonry wall and throwing the stones on to the wall, a roughcast is applied by mixing the stones into the render and applying this directly to the wall.

 

Pebbledash is a divisive building material. On the positive side it is cost-effective and has excellent durability in harsh weather conditions thanks to density of the render. For this reason, it is often used in remote and coastal areas. On the negative side, this density can also have an impact on the breathability of the render, meaning water vapour can often be trapped within a property as it can't naturally escape out of the wall. Furthermore, the finish that pebbledash can leave and the tendency for the rough texture to gather dirt, can often mean pebbledash is unattractive and dated.

 

Problems With Pebbledash

 

When it comes to the performance of pebbledash, there are a number of issues that can arise in certain cases. The big problem with pebbledash is that due to the stones being added to the outside of the render, these can eventually fall out over-time, leaving bare areas of exposed render underneath. This is simply due to the fact that while pebbledash has better resistance to weathering than other forms of render, it can still come under attack from the elements over-time.

 

When these pebbles fall out, the exposed render underneath can then begin to absorb moisture from rainfall, causing penetrating damp. When this moisture absorbs into the external wall of the property, it can lead to a number of other problems, such as damaged brickwork or internal damp and mould. This also leads to further damage to the render in the form of cracking. When the moisture enters the render it can under-go a 'freeze-thaw cycle' when temperatures drop below freezing. When the moisture within the render freezes it expands, causing movement within the render that opens up cracks. These cracks start small, however as they allow more moisture to enter the render, they cause large cracks to open-up each time, eventually leading to substantial damage.

 

 

Remove, Paint or Render Over Pebbledash?

 

There are a number of options when it comes to renovating pebbledash or roughcast, removing the pebbledash, painting the pebbledash or rendering over the top of pebbledash.

 

Removing Pebbledash

 

Removing pebbledash is possible, however it can be a long, labour-intensive process. Once the render is removed, it can expose some areas of brickwork that have been damaged such as cracks and spalling brickwork that wasn't there when the pebbledash was applied, which must be repaired. Furthermore, repointing may have to be done to restore the natural brickwork back to its former glory. This is means that removing the pebbledash can come with risks, which means it is generally only recommended if you desire a natural brickwork finish or you are restoring an older building back to original condition.

 

The cost of this can vary. Checkatrade estimate that having pebbledash removed is likely to cost £2,100 to £7,800 depending on the size of the property. This does not include the remedial work or any painting of the property, once the external rendering has been extracted.

 

 

Rendering Over Pebbledash

 

If removing the pebbledash isn't an option but you want to achieve a different rendered finish, you can render over the top of the existing pebbledash. This allows you to smooth over it using a non-textured, smooth render.

 

This is only an option if the render is not damaged. If there is any damage to the pebbledash such as cracking, this will have to be repaired before you apply any render over the top of the existing surface. 

 

Checkatrade estimate rendering a property will cost between £2,835-£5,670 for a typical sized property. This can vary not only due to the size of the property but the type of render you use. A cheaper render such as sand and cement will have low breathability, which can trap moisture within the walls and will absorb moisture over-time due to the fact that this and many other renders are porous and will uptake moisture.

 

Painting Pebbledash

 

The final solution for renovating your existing pebbledash is to paint the render, which is the easiest and most common form of renovating pebbledash. While this does not smooth over the textured surface of the pebbledash or roughcast, it does allow the textured render to be completely transformed and modernised with a fresh look.

 

As with any exterior decorating, the pebbledash must be completely sound before you can paint. if there are any cracks or areas where the pebbledash has failed, these must be repaired using either exterior filler, render repair or a textured paint to mimic the texture of the pebbledash. If you do not repair the pebbledash with the same texture, you can run the risk of these repairs being highly visible once you apply the paint.

 

When it comes to painting exterior masonry surfaces like pebbledash and roughcast, you must use a suitable paint that is designed for this use. These paints are called 'masonry paints' and are designed to be used on exterior brick, stone, concrete or render surfaces. Most standard masonry paints on the market today are acrylic-based masonry paints, which are designed to leave an attractive, coloured finish on exterior walls for anywhere from 1-10 years. The problem with these masonry paints is that not only do they have low breathability, they also absorb moisture, much in the same way as pebbledash that is failing. Once this moisture gets behind the paint film, it eventually becomes trapped, causing the paint to peel and flake. 

 

For this reason, Emperor Masonry Paint and its super hydrophobic technology were developed. Super hydrophobic technology creates an ultra water-repellent surface on exterior walls that causes water to 'bead' and fall off the surface before it can be absorbed into the wall. This, coupled with high breathability means that Emperor Masonry Paint will never peel or flake, as the moisture that is the primary cause of paint failure is prevented from building up inside the wall. Much like water, the super hydrophobic surface that is created also means that surfaces stay looking like new long term thanks to self-cleaning properties. Not only is dirt repelled from the surface like water, preventing it from adhering to the wall, but any organic growth such as lichens and algae are prevented, as the moisture this fungal growth requires is non-existent.

Emperor Masonry Paint is ideal for use on pebbledash for a number of reasons. Firstly, it helps protect pebbledash that is exposed to water seeping into the wall, by preventing this moisture from entering the render. This not only provides protected to previously damaged pebbledash, but also prevents any future damage to intact pebbledash and roughcast renders. Secondly, the self-cleaning properties of the paint ensure that the render stays clean and free from discolouration, which can be a big problem with textured renders such as roughcast and pebbledash due to their ability to hold dirt the small nooks and crannies. 

 

This ability to keep exterior walls clean and dry provides Emperor Masonry Paint with extremely high durability. Independent testing found after 2 5year of weathering there were no signs of deterioration or performance of Emperor Masonry Paint, showing it will not only perform for 25 years but likely far exceed this. That is why Emperor Masonry Paint comes with a lifetime guarantee, ensuring its performance for decades to come.

 

 

How To Paint Pebbledash

 

Anyone can paint pebbledash at home themselves, if they stick to a clear step-by-step guide on what process to follow. In any case, it is important that you pick a weekend where there isn't any rain due. Not only will this ensure that the surface is dry in order to start painting but will also ensure that you do not experience any sudden downpours before the paint has fully dried. It is also important to ensure the temperature is above 5°C, as this water-based paint will not dry in temperatures below this.

 

You will need:

 

• Masonry paint
  
• Primer (if required)
• Exterior cleaner
• Long-pile roller
• Paint scuttle
• Masonry brush
• Dust brush
• Dust sheets
• Window film
• Masking tape
• Exterior filler (if required)
• Filling knife (if required)
• Sandpaper (if required)

 

The equipment needed to paint pebbledash is similar to any other painting project with the difference being with the roller & brush. Ensure you get a long-pile roller and a masonry brush, as these are designed for heavily textured surfaces, allowing you both to paint them effectively and efficiently. 

 

Step 1: Prepare the surface

 

Preparation is the single most important aspect of any painting project. if you do not suitably prepare the surface, the subsequent painting will experience a number of problems and can even cause the paint to fail.

 

Start by removing any dirt and fungus from the pebbledash is the first step you need to take. Use a dust brush or a hose pipe to clean down the surface and remove any visible dirt & dust from the surface.

 

Ensuring the surface is dry, apply Emperor Exterior Masonry Cleaner. This is a fungicidal cleaner which kills fungal growth such as algae and lichens, ensuring that no growth occurs underneath the painted surface. Allow the cleaner to dry and be absorbed into the surface of the building for a minimum of two hours to fully disinfect the wall.

 

Once clean, it is time to assess the wall to see if any repairs need to be made. Larger areas of render that failed or delaminated away from the wall may need substantial repairs to be made by a rendering expert in order to prepare them to be painted. Any smaller defects or cracks can be repaired yourself using an exterior filler such as Toupret Exterior Repair Filler. Simply start by removing any loose material from within the defect, as this will prevent the filler from creating a solid hold within the hole. Once this has been done, you can fill the hole using the filler, working it back and forth using a filling knife until the defect is fully filled. This can then be sanded back using sandpaper to achieve the desire finish of the repaired area. 

 

The next step is to apply a primer if the pebbledash is not already painted. You should always apply a primer on any non-painted surface, as the primer is what ensures the paint can adhere to the wall. Applying one-coat of Emperor Exterior Primer to the pebbledash at roughly 5m2 per litre. The coverage of the primer is reduced due to the larger texture it has to cover when compared to a smooth surface. Allow this to dry for 5 hours at 20°C, which may take longer at lower temperatures.

 

Step 2: Painting the pebbledash

 

First, ensure you have a dust sheet down on the floor and apply masking tape to any windows and doors in order to get a beautifully neat finish.

 

TIP: Wrap drainpipes in newspaper as an easy way to protect them from getting covered in paint.

 

Starting at the top, work downwards and around the edges of the wall you are painting using a masonry brush. You want to apply Emperor Masonry Paint at roughly 3m2 per litre, which is half of the coverage you would expect on a smooth masonry surface. You can then use your long-pile roller to apply the first coat the rest of the surface, ensuring you work the paint into all of the small gaps in the pebbledash or roughcast. If you would like, you can dilute your first coat of paint with 10% water to help application. This involves adding 1L of water to 10L of paint, for example.

 

Allow the first coat 6-8 hours to fully dry and be recoatable. It will be touch dry and showerproof after 1-2 hours, the paint beneath the surface will still be slightly wet, so painting this before it has dried from the inside will reactivate the paint and cause you to have one thick layer of paint. 

 

Once dry, you can then apply your second coat of paint, this time undiluted. Allow this to dry for another 6-8 hours, while in the meantime you can clean your brushes and roller using hot, soapy water.

 

 

Frequently Asked Questions

 

Q. Why is Emperor Masonry Paint verified by the Energy Saving Trust

 

When building materials get saturated, they transfer heat much quicker than dry ones. Damp content of 5% can lower a materials insulating properties by 50%. With 35% of household heat loss occurring out of the external walls of a property, when external walls get wet they can significantly contribute to heat being lost out of a home. Emperor Masonry Paint has been shown to keep an external wall 6°C warmer than an untreated wall, which is why the Energy Saving Trust has verified the product as an energy saving measure that can be taken to improve the thermal performance of a property.

 

Q. What are the most popular colours for painting pebbledash?

 

By far the most popular colour for painting exterior walls, whether they are pebbledash, roughcast, brick or stone is white. White is a timeless shade that works equally well on heritage properties then it does on a new-build.

 

White offers a brilliant white finish that is beautifully bold and as strong a white as you can get. Coupled with dark oak or black exterior trim, it creates a finish that will stand the test of time.

 

  

Aside from white, the most popular exterior colours are creams, light greys & magnolia, which all offer a light, neutral tone to a property. Pastel shades such as light pinks, green and blues are rising in popularity however, as people begin to move away from the light browns and beiges, to give their property more character.

 

We hope we have answered any questions you may have had regarding pebbledash render and how to get the best out of it. If you have any other questions, feel free to get in touch with our team of experts who are on hand to assist you. Contact them today by emailing [email protected] or calling them on 0333 006 8880. Alternatively, shop our range of ultimate performance exterior products today and get FREE next working day delivery on all orders over £50.