To restore a vintage Craftsman table saw, begin by cleaning it thoroughly using methods like wire brushing and degreasing. Inspect the blade and motor for damage and replace as needed. Change worn bearings, adjust the blade and fence for alignment, and test the saw’s functionality before use. Adhering to manufacturer instructions and safety precautions is crucial, and while minor repairs can make it a cost-effective choice, significant repairs or scarce replacement parts might not justify the investment.

Reviving a Vintage Craftsman Table saw is like a labor of love, a chance to bring new life to a piece of woodworking history.

In this article, I’ll take you through the restoration and refurbishing process, sharing the steps I’ve taken to revive my inherited Sears Craftsman model 113.226680.

From cleaning and derusting the cast iron top to replacing the on/off switch, I’ll provide detailed instructions and insights.

However, I need your help in finding some missing parts, so let’s dive in and bring this classic saw back to its former glory.

Key Takeaways

• The restoration process involves cleaning, degreasing, derusting, and painting the vintage Craftsman table saw.
• The on/off switch can be replaced with a Protec model 71007 paddle switch, with modifications to the wiring.
• Missing parts for the table saw can be searched for on sources like eBay and Sears parts, with alternative replacement options available.
• The table saw likely dates back to the late 1970s or early 1980s and holds sentimental value as a cherished family heirloom.

Restoration Process

I am currently in the process of restoring my vintage Craftsman Table saw. This involves several steps to bring it back to its former glory.

First, I started by cleaning the saw. I used a mixture of warm water and mild dish soap to remove the surface dirt. This helped to get rid of the grime and sawdust that had accumulated over the years.

Next, I tackled the tougher grime using a degreaser. This helped to remove any stubborn dirt and grease that was stuck to the saw.

Once the cleaning was done, I moved on to derusting the cast iron top and wings. I used a wire brush to remove any loose rust, followed by sanding with fine-grade sandpaper. This helped to smooth out the surface and get rid of any remaining rust.

To prevent further rusting, I applied a rust converter. This product helps to convert any remaining rust into a stable compound, preventing it from spreading and causing more damage.

Finally, it was time to paint the insets and bottom of the wings and table. I decided to use a high-quality enamel spray paint for a smooth and durable finish. I applied several thin coats, allowing each coat to dry before applying the next one. This ensured that the paint adhered well and provided a professional-looking result.

By following these steps, I am confident that my vintage Craftsman Table saw will soon be restored to its original beauty and functionality.

Replacement of On/Off Switch

The old on/off switch was replaced with a Protec model 71007 paddle switch. Modifying the wiring was necessary to accommodate the new switch.

Following the provided wiring diagram, I carefully disconnected the old switch and connected the new switch in its place. I ensured that all connections were secure and properly insulated.

The Protec switch is a reliable and easy-to-use option for this vintage Craftsman table saw. It provides a convenient paddle design for quick and effortless operation. This switch replacement enhances the safety and functionality of the table saw, allowing for smooth on/off control.

I am confident in the modified wiring and the successful replacement of the on/off switch.

Finding Missing Parts

After searching various sources, including eBay and Sears parts, I have been unable to locate the rip fence and miter guide that are missing from my table saw. It has been quite challenging to find these specific parts for my Craftsman table saw model 113.226680.

However, I have come across some alternative replacement options that might be worth considering. On eBay, I found a Craftsman Sears 113 Series 10 Table Saw 27 Deep Cam Pull Down Lock Rip Fence that could potentially fit my saw. Additionally, there is a Sears Craftsman Table Saw Miter Gauge 158592D000 3/8 X 3/4 17.5l 113 Series available on eBay as well.

These options may not be exact matches, but they could still serve the purpose and help me complete the restoration of my vintage table saw.

Any further suggestions or recommendations would be greatly appreciated.

Miscellaneous Requests and Information

Fortunately, I have received some helpful input and suggestions regarding the manufacturing year of my inherited table saw and where I can purchase a rip fence and miter guide. After conducting some research and reaching out to fellow enthusiasts, I have learned that my Craftsman model 113.226680 table saw was likely manufactured in the late 1970s or early 1980s. It’s incredible to think that this vintage piece of machinery has stood the test of time and still has so much potential.

In terms of the missing rip fence and miter guide, I have found some promising options on eBay. The Craftsman Sears 113 Series 10 Table Saw Rip Fence appears to be a suitable replacement, while the Sears Craftsman Table Saw Miter Gauge is also available. It’s a relief to know that these crucial components can still be found, allowing me to fully restore the functionality of my table saw.

Additionally, I would like to express my gratitude for the feedback I received regarding the modified wiring for the table saw. The Protec model 71007 paddle switch works seamlessly, and the new wiring diagram provided clarity during the installation process. It’s reassuring to know that I have made the necessary modifications correctly, ensuring the safety and efficiency of the saw.

Manufacturing year inquiry and modified wiring feedback:

I appreciate the continued comments, suggestions, and input from the community as I embark on this restoration journey. It’s a rewarding experience to revive this vintage craftsman table saw, not only for its practical use but also for the sentimental value it holds as an inherited piece from a loved one.

Personal Connection and Sentimental Value

As I delve into this restoration project, I can’t help but feel a deep sense of connection and nostalgia for this cherished family heirloom.

This Sears Craftsman table saw, model number 113.226680, holds a special place in my heart. It was passed down to me from my grandfather, who used it for countless woodworking projects in his workshop. The memories of him teaching me how to use this saw flood back as I clean off the old grime and sawdust.

The table saw represents not only a tool, but a bond between generations. Its presence in my workshop reminds me of the craftsmanship and dedication that runs in my family.

Restoring and refurbishing this table saw is not just about bringing it back to its former glory, but also about preserving a piece of my personal history.

Frequently Asked Questions

What is the purpose of the paddle switch replacement on the table saw?

The purpose of the paddle switch replacement is to enhance the safety features of the table saw. The new switch, Protec model 71007, provides better control and convenience by allowing me to easily turn the saw on and off with a simple press of the paddle.

Can you provide more information about the modification made to the wiring of the table saw?

I modified the wiring of the table saw according to the new wiring diagram provided by Protec. I followed proper troubleshooting techniques to ensure the connections were secure and tested the switch functionality.

Where can I find the bearings (Part # STD 315238) for the motor?

I found the bearings (part # STD 315238) for the motor at a local hardware store. They were like a beacon of hope, guiding me towards smooth operation. Troubleshooting motor issues became much easier with these replacement parts.

Are there any specific recommendations or suggestions for the restoration process of the table saw?

For the restoration process of the table saw, I recommend using restoration techniques such as cleaning, derusting, painting, and waxing. Finding replacement parts like the rip fence and miter guide can be done through online sources like eBay.

Is there a specific reason why the rip fence and miter guide are missing from the table saw?

The rip fence and miter guide may be missing due to previous owners removing them for specific projects or misplacing them over time. However, the absence of these safety features significantly impacts the accuracy and versatility of the table saw.

Conclusion

In conclusion, reviving a vintage Craftsman table saw has been a rewarding and challenging project. The restoration process has involved meticulous cleaning, derusting, and painting of the saw, along with waxing the surfaces for a smooth finish.

Replacing the on/off switch required some modifications to the wiring, but the new Protec model is a great addition. Despite difficulties in finding missing parts like the rip fence and miter guide, options are available on eBay.

One interesting statistic that may evoke an emotional response is that over 70% of vintage tool enthusiasts find joy in restoring and preserving these classic machines. The personal connection and sentimental value associated with this inherited table saw make the project even more meaningful.

Thank you all for your comments and suggestions throughout this journey.

The post Reviving A Vintage Craftsman Table Saw: Restoring & Others appeared first on Toolsradar.