Do you need to partition a space without incurring a full renovation cost? Then Temporary Wall systems are the way to go. These are portable walls that you can use to divide a large room into smaller portions.

Unlike interior walls, temporary walls have modifications, but electrical wiring and plumbing pipes do not run through them. These Wall Systems are built on the ground then mounted into the appropriate space that needs to be divided. You can use these wall systems to partition a living room and create other separate or private rooms. Additionally, temporary wall systems come in handy in construction projects for various reasons, including noise, dust, and human traffic control.

Installing a Temporary Wall System

According to trimaco.com, if your home's interior layout is something that bothers you, then a temporary wall system is your best shot. Such installations are common among renters who desire to make the best out of living space. Homeowners, too, have adopted this method of using temporary walls.

Installing a temporary wall is not a complicated process. You can decide to do it yourself or hire a professional. However, you also need to check the building codes in your area and the relevant stipulations put in place by the local authorities.

The installation process is as follows:

1. Apply the sill seal where you intend to lay the temporary wall. The seal prevents wall, ceiling, and floor damage while securing the temporary wall wherever it is installed.
2. Cut two 2X4s frames that will act as the top and bottom temporary wall margins.
3. Cut two more 2X4s frames that are 3 inches less than the ceiling height. You will use these frames as the end studs.
4. Fix vertical studs between the wall’s top and bottom margins. Place the bottom plate on the sill seal that you have already applied on the floor. Have someone else hold the top plate for you and place the studs in between the plates. You can use a hammer to tap in the studs that require persuading to fit into place. If the studs are too tall, you can sand them or cut them using a circular saw.
5. Use nails or screws to attach the outside studs to the plates. It is recommendable to screw or nail the top to the adjacent ceiling joist for extra stability. This is especially important if there are kids in the house or plan on installing a door on the temporary wall.
6. Add the remaining studs and fix the drywall panels using screws. There should be 16 or 24 inches between the studs. Use screws for easier removal of the wall system.

Finish the installation in your style. You can decide to paint it or leave it the way it is.

Tools Needed when Installing Temporary Wall Systems

The tools and materials needed for such a project are affordable and readily available in the market. Using the internet, you can get the materials and tools in online stores, such as Amazon. These materials and tools include:

• Hammer to drive in the nails
• Screws and a drill driver
• Drywall
• Sill seal
• Circular saw
• 2X4 lumber
• Drill
• Nails

Uses of a Temporary Wall System in a Construction Site

Renovation and construction projects can cause inconveniences, especially for people near the construction site. Therefore, you should embrace any method that will likely make the process tolerable. These are four uses of a temporary wall system in a construction site.

• Dust control – it is obvious that construction work produces a lot of dust. With these wall systems, you can ensure that dust that reaches people is as little as possible.
• Noise control – construction machinery and activities may cause noise pollution, but the temporary wall systems are an ideal solution for that.
• Traffic management – these wall systems help you manage the flow of people in and out of the area where the construction or renovation is taking place.
• Temporary office space – when a building is under renovation, some of its offices may be inaccessible. Therefore, you can use the temporary wall systems to set up offices that will be used until the renovation project is over.

Temporary wall systems have been in use for quite a while. Their ease of setting up and removal makes them the ideal solution when you want to divide your house temporarily. You can decide to hire a professional to install these wall systems for you or do it yourself.

The installation process is not complicated, and the materials and the tools needed are readily available. However, if you decide to do it yourself, ensure that you have someone to help you with some of the tasks.