Most people don't realize how easy it is to make Hash Oil with Butane. The toughest part about it is having enough plant matter to get the job done along with $40 for the case of butane. Keep in mind that when it comes to making hash oil, that the more quality plant matter you use for the process, the better the resulting hash oil will be. Try using all buds instead of trim and it will really blow your mind.

You also must make sure that you local head shop carries 99.9% pure butane which is the only type of butane you can use. The crap you can get at 7-11 is NOT what you want to use and it will NOT work. So make sure you track down the stuff that costs about $50 for a case of 12 which will be enough for two batches.


Supplies

3 foot section of 2" Food Grade PVC Pipe(the size of the pipe depends on the amount plant matter)

(2) 2" PVC Caps

Small piece of Cheese cloth

Drill with 1/8 inch drill bit

Case of Vector Butane

Plant Matter(buds, trim, or both)

Glass dish to collect your oil must have a rim to contain the liquid but be shallow enough to scrape the oil out.

Small Folding Ladder

Duct Tape

Making your Butane Hash Oil

Caution: Turn of all electrical devices and anything that can make a spark or YOU WILL BLOW YOURSELF UP!!

1. Drill (1) hole one of the PVC caps for inserting the butane can

2. Drill about 6 holes in the other cap and put cap on your PVC pipe with a small piece of cheese cloth fitted for the cap

3. Fill the pipe with your plant matter

4. Cap the other end

5. Take your folding ladder and duct tape the Pipe to the ladder so it stay in place vertically, hovering over the ground

6. Place your glass bowl under the pipe for collecting the oil
b>
7. Spray about 4-6 cans of butane through the pipe

8. Let butane bubble off which will take about 10 minutes and you are good to go

The finished product should look like this







Scrape it out and let the good times roll!!!