Diamonds are the most complex structures known to humankind and are widely used in construction for their tremendous strength and durability. These industrial-grade Diamond qualities make diamond Drilling one of the most utilized drilling methods in the modern construction industry.

Industrial Diamond Drilling is a very successful and ideal approach for undertaking complex drilling targets when other types of equipment fail. However, to achieve optimal results, your Diamond drilling specialists must be complacent.

As with any job, drillers can start to develop carelessness and negligence in their work. In this post, our Diamond drilling London experts have shared their experience and outlined some of the most common drilling mistakes that they have encountered.

For a complacent drilling process and precise results, it is crucial to avoid the red flags below. Read on to know more.

Six Common Diamond Drilling Mistakes That Can Affect Your Results

1.Not Preparing Your Site

One of the most common mistakes diamond drillers / contractors make is not appropriately preparing the construction site. For a contractor, it is essential to communicate with their drilling company and carry out site preparation as per their instructions.

You should pay attention to the potential hazards on the site and implement a proactive approach to eliminating them. Some of the vital site preparation activities include –

● Removal of old workings and scrap items.
● Elimination of vegetation, overhanging power lines, and cutting off the underground power supply.
● Arrangement for the required power and water supply as per your drilling equipment.
● Effective traffic management and preparation of escape routes should any construction hazard arise during the drilling process.
● Setting up & checking of drill pad.

2. Lack Of Patience

Lack of patience is more often than not the root of all the bad habits that diamond drillers may develop over time. To take as many projects as possible and increase their money inflow, many drillers rush to complete their tasks in minimum time. However, in complex processes like diamond drilling, lack of patience can lead to fatal accidents, delays in the project, and waste money.

Therefore, it is essential to be patient and carry out the drilling processes with utmost care. To get optimal outcomes, it’s vital to pay attention to what you’re doing and how you’re using the drilling equipment.

3. Improper Lubrication

To keep your drill bits up & running for a long haul, proper lubrication is of paramount importance. Your drilling experts should take time to lubricate your equipment before and after the drilling procedure appropriately.

Multi-purpose grease can be used on a wide range of tools and equipment, including the inner sides of core barrels and the grease points on a drill rig (bearings, pivot points, etc.). Thread compound should be used on ALL threaded connections – rods and casing – as it can be sticky and hinder productivity.

4. Not Maintaining The Equipment Properly

Diamond drill bits are inherently more robust than their alternatives and require minimum maintenance. However, this does not mean that you should ignore the maintenance altogether.

With regular maintenance, you can detect issues with your equipment before it leads to significant problems. This proactive maintenance minimizes the chances of equipment failure and improves the durability of your tools.

Carrying out inspection and maintenance helps you save a lot of money, time, and effort in the long run. It is not something that should be taken lightly.

5. Not Adhering To Safety Guidelines

In complex and high-risk jobs like Diamond drilling London, adhering to safety guidelines is paramount. All diamond drilling employees must abide by the rules and regulations laid out by their supervisor or legal authorities.

Some of the most important safety guidelines to follow while carrying out diamond drilling are as follows –

● Cover yourself with appropriate clothing, helmet, eye protection, gloves, reflective vests, and safety boots.
● Avoid lifting extremely heavy objects on site – it may lead to severe injuries.
● Take care that the vicinity is clear of all the objects that can lead to accidents.
● Always have a senior driller on the site for quality assurance and ensure that the safety guidelines are followed throughout the project.

6. Not Listening To The Drill

One of the most prominent qualities of a qualified diamond driller is determining what drill rig sounds and vibrations indicate.

In some projects, the only way to predict what is going on beneath the surface is to understand the sound and feel of the equipment. A sudden increase in the vibrations, loud engine sound, or difficulty in moving the drill bit is all indications of trouble brewing.

Conclusion

If you notice any of the above-mentioned red flags on your drilling site, you should immediately discuss them with the person in charge. These mistakes can not only cause delays but also increase your overall costs and lead to fatal accidents.

Contact your nearest Diamond drilling London company today if you are still confused and need more tips on maintaining diamond drilling tools and tactics to improve drilling efficiency.

The post Red Flags To Look Out For When Hiring A Diamond Driller appeared first on Explore Life Style.