No Audio Sound Issues in Windows is a serious issues that can be fixed easily. Don’t waste your time and troubleshooting methods. Follow the steps in this article to fix the issue.

Audio problems are quite common on computers and can often prove a headache to computer owners suddenly unable to hear sound on their PCs. Many people who encounter such audio problems make the mistake of assuming something is broken inside the PC and so hotfoot it to the repair shop. This can lead to hefty bills as unscrupulous repairmen often take full advantage of unsuspecting customers, by charging for unnecessary or imaginary repairs, when all that was needed were a few tweaks in software.

Hardware faults are not unheard of. In fact, the very first thing you should check is that the cable feeding audio to your speakers has not become disconnected from the PC back panel. After you have ruled this out, the next thing to look at is the various software options on your PC that determine audio playback.

How To Solve The Problem of No Audio Sound Issues in Windows

When a program such as Windows Media Player is playing a music file or CD, but no sound is heard, the first port of call on a Windows PC should be the Control Panel. In the Control Panel, select ‘Sounds and Audio Devices, and choose the ‘Audio’ tab. There you will find a list of possible playback devices. Even if the device selected in the dropdown list is the correct one, sometimes a fault such as this can be cured by selecting a different device from the list and then reselecting the old device. If this does not work, check to see if the volume for the device is turned up.

If you are still unable to hear any sound, check the ‘Properties’ for the audio playback device. If the device is stated to be working properly, try updating the driver. This is another option found in ‘Sounds and Audio Devices’ under ‘Hardware’. Sometimes updating or reloading the driver does the trick.

A further possibility if you are still unable to hear sound is to uninstall the audio device from your computer and then reinstall it. This is a tried and trusted method that is known to solve a lot of software problems, including this one. However, you should note that if you uninstall the audio device, reinstalling it will likely require an installation CD that was supplied with your PC.

Tweaking audio devices in the Control Panel, or uninstalling and reinstalling your audio playback device are the two actions likeliest to cure common audio faults. However, there could be a hardware fault. If your audio playback device is a sound card fitted to your motherboard, you should check to see if it has not become ‘unseated’ (slightly disconnected from the motherboard). This can easily happen and can cause sound to stop working.

To troubleshoot this, turn off your PC and disconnect it from the main supply. Open up the PC case and locate the sound card. Unscrew it and pull it out from the slot it is attached to, then reinsert it into the slot. This is definitely worth trying as an unseated card is a very common cause of audio faults.

If after all this you are unable to get audio working again, it may be you have a more serious hardware problem that will require the attention of a computer repairer. But you should try all the other tactics first, as described above because doing so will correct up to 95% of such audio faults.

The post How to Fix No Audio Sound Issues in Windows appeared first on Heels.com.ng.