The brightness of the indicator will decrease on receipt of AIS messages. If after reading this Manual you are unsure about any element of the installation process please contact your dealer for advice. It is recommended that crimped and soldered lugs are used to connect the AIS RX to the power source. Thank you for buying this Ais Receiver. If the guidance given in the table above does not rectify the problem you are experiencing, please contact your dealer for further assistance.

This equipment must be installed in accordance with the instructions provided in this manual. Please take note of the warnings in section 1 regarding the use of antennas.

Please dispose of the packaging in an environmentally friendly manner.

advanSea Rx-100 Dual Channel Ais Receiver

The NMEA data port output operates at a baud rate of baud. Check that the connections to the Chart Plotter are correct. It is recommended that crimped and soldered lugs are used to connect the AIS RX to the power source. It allows vessels equipped with AIS to automatically and dynamically share and regularly update their position, speed, course and other information such as vessel identity with similarly equipped vessels.

The use of ScotchlokTM connectors is recommended for this purpose.

AdvanSea RX-100 AIS Receiver

Also included on the CD is the product manual. In addition to the items provided with your AIS RX the following items will be required for installation: AIS receivers will generally receive transmissions from class A transceivers, class B transceivers, AtoNs and AIS base stations but do not transmit any information about the vessel on which they are installed. Connecting an optional NMEA device Wire colour NMEA function Please note that the ‘Receive’ connections should not be connected to your chart plotter as it is not normal for the receiver to receive data from the chart plotter.

Once the unit has been installed it is ready for use.

Disposal of this product and packaging! Similar to class A transceivers in many ways, but are normally lower cost due to the less stringent performance requirements. The following sections give a brief overview of each item. If after reading this manual you are unsure about any element of the installation process please contact your dealer for advice.

Please contact your dealer for details of suitable products. Please ensure all items are present and if any of the items are not present contact your dealer. The manufacturer of this product disclaims any liability for rd-100 arising from omissions or inaccuracies in this manual and any other documentation provided with this product.

advanSea AIS RX Receiver | Absolute Marine

We constantly strive to achieve the zis possible quality standards, should you encounter any problems with this product, please contact your dealer who will be pleased to offer whatever assistance you require. Do not install this equipment in a flammable atmosphere such as in an engine room or near to fuel tanks.

Aks the guidance given in the table above does not rectify the problem you are experiencing, please contact your dealer for further assistance.

This product has been engineered to offer you the highest level of performance and durability and we hope that it will provide many years of reliable service. The NMEA data port provides the connection to your chart plotter rx-1000 consists of four wires colour coded as shown in the table below and in Figure 8. Step 1 – Installing the AIS RX The following sections explain the installation process step by step for each of the main elements of the system.

Advansea RX Dual Channel AIS Receiver

Antenna cables Alternatively, if you wish to use an existing VHF antenna, antenna splitter products are available which allow the existing antenna advaansea be used with two radio devices, such as a VHF voice radio and the AIS RX The antenna should not be co-located or operated in conjunction with any other transmitting antenna. Connect the black wire to the supply negative terminal.

If you require longer cables to reach your power supply, please ensure the cables are capable of carrying an average current of up to mA.

Means of connecting the cables together will also be required. When reading this manual please pay attention to warnings marked with the warning triangle shown on the left.

This equipment must be installed and operated according to the instructions contained in this manual. The status indicator will illuminate when power is applied to the unit and it is running in normal mode. Please ensure your NMEA device operates at baud. It’s a community-based project which helps to repair anything.

VHF antenna Installation 3.

The post ADVANSEA AIS RX-100 DRIVER DOWNLOAD appeared first on Drivers 4 Dummies.