Xiaomi is a renowned mobile brand that has gained tremendous popularity across the world. Like any other smartphone, Xiaomi devices require updates from time to time to enhance their performance and fix any bugs or issues. In this article, we will guide you on how to flash Xiaomi firmware(stock rom) using fastboot flash in a step-by-step manner.

Pre-Requisites

Before we proceed, you need to ensure that you have the following pre-requisites:

• A Xiaomi device that requires a firmware update
• A computer with an active internet connection
• Xiaomi USB drivers installed on your computer
• A USB cable to connect your phone to the computer
• A backup of all your important data on the device as flashing can cause data loss

Step-by-Step Guide

Follow these steps to flash Xiaomi firmware using fastboot flash:

Step 1: Download the Firmware

Visit the official Xiaomi website and download the firmware for your device. Ensure that you download the correct version so that it is compatible with your device. Extract the files to a folder on your computer for easy access.

Step 2: Enable USB Debugging

On your Xiaomi device, go to “Settings” and scroll down to “About Phone”. Tap on “Build Number” seven times to enable Developer options. Then, go back to “Settings”, click on “Additional Settings” and select “Developer Options”. Here, turn on “USB Debugging”.

Step 3: Boot into Fastboot Mode

Turn off your Xiaomi device and press and hold the Volume Down + Power button simultaneously until you see the fastboot screen.

Step 4: Connect your Device to the Computer

Using a USB cable, connect your Xiaomi device to your computer. Ensure that your computer detects your device.

Step 5: Open Command Prompt

On your computer, go to the folder where you extracted the firmware files in Step 1. In this folder, press the Shift key + right-click and select “Open command window here” or “Open PowerShell window here”.

Step 6: Enter Fastboot Commands

In the Command Prompt or PowerShell window, type the following command and press enter:

fastboot devices

This command will display the connected devices. If your device is detected, it will be shown in the list.

Next, type the following command to flash the firmware:

fastboot flash (firmware file name).img

Replace (firmware file name) with the actual name of the firmware file that you downloaded in Step 1. Press enter and wait for the flashing process to complete. This may take a few minutes.

Step 7: Reboot your Device

Once the flashing process is complete, reboot your Xiaomi device. You should now have updated firmware on your device.

Conclusion

Flashing Xiaomi firmware using fastboot flash can enhance your device’s performance and fix any bugs or issues. However, it is important to follow the steps carefully and ensure that you have all the necessary pre-requisites before beginning. We hope this step-by-step guide has been helpful in flashing your Xiaomi device’s firmware using fastboot flash.