TVs are cheap these days unless you want one thats bigger than 50-inches. Whereas your average branded 50-inch model is about £600 ($500), Sonys 55-inch Bravia KD55A1 OLED TV will cost you four times as much!

Those who want the 85-inch Sony Bravia 85XD8505 can expect to pay a twelvefold cost increase for a TV thats not even double the size of a 50-inch model.

The solution for those who want the big-screen experience without the high cost is projection. And thats exactly the market that BenQ is addressing with its new MH530FHD (Full HD) 3,300 lumens DLP projector, which retails at $549 (around £415).

Design

There is something distinctly old-school about the BenQ MH530FHD, but that might not be a bad thing for this particular type of product.

Clad in gorgeously textured shiny white plastic, BenQ has tried its very best to disguise the fact that this is a rectangular metal box with a bright lamp shoved in it.

This styling is certainly an improvement over the BenQ MH530 we covered previously, as this model looks much less like a cheap electric fan heater.

Its large, but not so big that it cant be easily transported. BenQ built this unit more with permanent installation in mind, but it could be carried to meetings without much effort.

There are two adjustable feet at the rear, along with one at the front, and the underside has some threaded holes for those owners who fancy mounting it inverted to the ceiling.

At the rear are the inputs which include a pair of HDMI ports, two VGA connectors, one S-video and one composite. Also at the back there is a USB (Type mini B) port and RS232 (DB-9pin) connection, and both audio in and out via 3.5mm mini jacks.

DVI and DisplayPort both got the cold shoulder, but thats not entirely unexpected for this sector. Where it does meet or even slightly exceed expectations is in respect of the projection electronics inside.

At its heart is a single-chip DLP, the Texas Instruments DarkChip 3. With a native resolution of 1080p, when coupled with the massive 3,300 lumens bulb, it can project a 16:9 ratio image that ranges in size from 60-inch to 300-inch. How large you can go in that range entirely depends on how far back from the wall you place the MH530FHD.

Its a short-throw design that can generate a 100-inch image from just 5.5 foot away, and includes a 1.2x optical zoom lens that can be used to tweak the projection size nicely.

By default the lens is offset 7% from the projector axis, enabling it to work on a table as effectively as if mounted high up.

The success or failure of modern projector designs often depends on the quality of the DLP and the illumination it receives. The DLP is good here, and BenQ employed a 203W UHP lamp that delivers sufficient illumination.

The downsides of using this configuration are power consumption and the limited lifespan of the UHP bulb.

As with most home projectors, BenQ included various lamp modes that either extend the life of the bulb or increase the amount of light available for a shorter running time.

Normal mode offers a lamp life of up to 4,500 hours, Eco mode extends that to 6,000 hours, and Smart Eco promises more than 10,000 hours. That makes Smart Eco the equivalent of nearly seven years of use for 4 hours each day. And, in our testing, we found that Smart Eco looked brighter than normal in many situations, so much so that we left it as our default setting.

The replacement bulb costs about $150 (around £115) when you do eventually need one, which is cheap compared to some projector bulbs weve seen.

Along with the projector, BenQ includes a small but effective remote control that allows you to navigate the configuration menus and select inputs quickly.

Overall, the MH530FHD has the price and specs to be a winner, but does it also have a show-stopping problem like the MH530 that came before it?

Performance

The MH530FHD impressed us from the very outset, and proved to be an exceptional performer.

BenQs quoted 3,300 lumens brightness is right on the money, and even with Smart Eco mode active and 50% brightness set, we recorded more than 2,000 lumens.

The image is also remarkably sharp, well saturated, and displays an amazing contrast range.

BenQ mentions a contrast ratio of 15,000:1, and while we cant confirm that, we can categorically state that the contrast is exceptional.

While projected images cant offer the same deep blacks as a flat-screen TV, in almost all other respects the image that this creates is superior, especially in fast-moving scenes.

Also, the rainbow problem that blighted the original MH530 isnt an issue we noticed with the MH530FHD.

At short range, the MH530FHD can create a 100-inch image that doesnt require shade to experience. BenQs 300-inch claim is a mild stretch, and it needs a dark environment to work effectively.

This design is also the best 3D projection experience that weve yet had, and superior in many respects to the 3D offered by LCD technology.

One issue with projectors is fan noise, as theyre often far from silent. Thankfully, BenQ managed to keep the noise levels low, and the fans RPM doesnt distractingly alter once the machine has reached its ambient operating temperature.

The only sound issue we had is that the single internal 2W speaker just isnt loud enough, especially for outdoor use. Although, in the home theatre context, it is highly unlikely that it would be the chosen method of audio output.

With the confines of 1080p output, for both media presentation and gaming, the MH530FHD is an exceptional performer that has redefined our expectations of what a device in this price range can deliver.

Which begs the question: how could BenQ make this better?

On one level this device competes with Smart TVs, and beyond 4K quality those devices also have their smart capabilities, and digital decoders.

That similar functionality hasnt yet turned up in projectors is a little disappointing, as it cant cost much to add and could easily create some projector/TV continuity. The assumption seems to be that HDMI covers that option if people want it.

If thats the companys thinking, surely three HDMI ports and one token VGA connector would be a better configuration than two of each?

In conclusion, the MH530FHD could be smaller, quieter, have an even longer bulb life, use less power and have a smart interface. But there is always room for improvement, and there is little, if anything, inherently wrong with this projector now.

Final verdict

In short, this is a terrific piece of kit!

While much of the design is welded to conventional projector thinking, it is difficult to argue with a product that succeeds in its mission so effortlessly. If youve watched a projected movie and got distracted by the lack of contrast or color saturation, then it wasnt the BenQ MH530FHD you watched it on.

The replacement bulb costs are low, and whats more, by using Smart Eco mode you can easily avoid that additional expenditure for some considerable time.

• Weve picked out the best projectors of 2017

http://www.techradar.com/reviews/benq-mh530fhd