EVEYTHING YOU NEED

4

CHANNELS

4K IP Cameras
4K NVR Recorders' data-original-title="4K">4K NVR can support up to 4 cameras

4

CAMERAS

4 × 4MP dome / bullet IP cameras

100^FT

NIGHT VISION

Maximum night vision range

1^TB

HARD DRIVE

Expandable up to 10TB

APP

Enabled

Free mobile apps for remote viewing

No Monthly Fees

There are absolutely no monthly fees associated with this security system. All video footage is safely stored on the security grade hard drive located within the recorder.

With or Without the Internet

Standalone camera systems do not need the internet to operate. However, an internet connection will be necessary if you wish to use a smartphone, tablet or computer to access features such as remote monitoring.

Connects directly to TVs and Monitors

Easily watch live video feeds or review video footage on most Monitors or HD TVs by using the included HDMI Cable.

NVR Network Video Recorder

Security NVRs will connect to IP cameras using CAT5 network cables and will store pre-compressed video footage from IP cameras.

4K IP Cameras
4K NVR Recorders' data-original-title="4K">4K Ultra HD Resolution (4×1080p Full HD)

4K IP Cameras
4K NVR Recorders' data-original-title="4K">4K resolution offers four times the resolution of 1080p with approximately 4000 horizontal pixels, provides the maximum level of detail and clarity available.

24/7 100% Duty cycle hard drive pre-installed

The hard drives are designed to work in a security environment, including simultaneous recording & playback from various streams.

Easy  (PoE 15.4w each/port) - (PoE+ 25.5w each/port)
Max PoE Distance = 328 feet
PoE Extenders allow you to run PoE up to 1500ft using :
GV-POEX0100 PoE Extender' data-original-title="PoE">PoE installation

Each of your cameras only require a single Cat5e ethernet cable to connect them to the NVR. This cable not only powers the camera, but also transmits video and audio data. It also provides a stable network connection and flexible installation options up to 300ft, since they do not need to plugged into a power source.

Continuous, scheduled, and motion recording options

Your NVR features three different recording modes. You can record footage continuously, during scheduled times or upon movement. These recording modes can be customized with each camera as well, so you can program a camera in a higher traffic area to record constantly while a camera in a lower traffic area can be set up to record only on Motion events or during the night.

Regional motion zones

There may be certain areas of your property that you want to keep an extra eye on, such as the front or back door. Using the NVR, you can program specific motion zones so that they are customized for heightened sensitivity (the amount of motion needed to register that movement) and threshold (how much motion is needed before creating a motion “event”). That way you can highlight important spots such as entranceways so that even the slightest motion will trigger the camera to start recording while other areas would require a higher level of motion in order for the camera to start recording.