14 Ports 10/100/1000M Managed Industrial Poe Switch
Product Description
The Managed Industrial Fiber POE Switch LIMPOX14-4SFP features total 10x RJ45port (10/100/1000M) with 4x SFP ports (1000M). It supports wide operating temperature (-40 to +75degreeC). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are specially designed for harsh industrial environments certified by UL508 and UL Class 1 Div 2 requirements. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.
- Managed Switch with 10x 10/100/1000Base-T ports, 4x Gigabit SFP slots, and 1 console port
- L2+ features provide better manageability, security, QoS, and performance.
- Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
- Support spanning tree STP(802.1D) and RSTP(802.1W).
- Jumbo frames support up to 9.6K kilobytes.
- Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.
- Support cable diagnosis
- Supports both IEEE 802.3af and 802.3at (4ports), and every port PoE
configuration function - G.8032, support
Specification:
14Ports 10/100/1000M Managed Industrial POE Switch with 4Ports SFP 1000MNumber of RJ45 ports (10/100/1000BaseT)10 (Ethernet port, POE supported)Number of SFP ports (1000M)4Optical portsSFPLayer2 switchingSpanning Tree Protocol (STP)Standard Spanning Tree 802.1d Rapid Spanning Tree (RSTP) 802.1wG.8032 ERPS14ports per groupVLANSupport up to 4k VLANs simultaneously (out of 40906 VLAN IDs); Port based
VLAN; 802.1Q tag based VLANIGMP v1/v2 snoopingIGM limits bandwidth intensive multicast traffic to only the requesters.
Support 1024 multicast groups (source-specific multicasting is not supported)POE standard /typeIEEE802.3af/at, END SPANMax POE Power per port15.4W per port (IEEE802.3af) & 30W per port (IEEE802.3at), total 4portsSecurity Secure Shell (SSH) ProtocolSSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supportedSecure Sockets Layer (SSL), HTTPSSSL encrypts the http traffic, allowing advance secure access to the browser-based
management GUI in the switchPort SecurityLocks MAC Addresses to ports, and limits the number of learned MAC addressesDHCP Snoopingprevent unauthorized configuration and use of IP addresses, while providing
support for IP Source Guard and ARP detectionIP Source GuardPrevents datagram with spoofed addresses from being in the networkARP InspectionPrevent ARP spoofing attacks and ARPStorm ControlPrevents traffic on a LAN from being disrupted by a broadcast, multicast,
or unicast storm on a portACLsSupport for up to 256 entries; Drop or rate limitation based on source
and destination MAC, VLAN ID or IP address, protocol, port, differentiated
services code point (DSCP) / IP precedence, TCP/ UDP source and destination
ports, 802.1p priority, Ethernet type, Internet Control Message Protocol
(ICMP) packets, IGMP packets, TCP flagQualtiy of Service HardwareSupport 8 hardware queuesScheduling8 COS queues per port support strict priority and weighted round-robin
(WRR)ClassificationsPort based; 802.1p(PCP) VLAN priority based;Rate LimitingIngress policer;egress shaping and rate control;per VLAN,per port and
flow basedManagement (Web/ SSL, Telnet/ SSH, ping,
Trivial File Transfer Protocol (TFTP), SNMP, Syslog)Web GUIBuilt-in switch configuration utility for browser-based device configuration
(HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and
monitoringDual ImageDual image provides independent primary and secondary OS files for backup
while upgradingFirmware upgradeWeb browser upgrade (HTTP/ HTTPs) and TFTP;??Upgrade through console port
as wellPort mirroringTraffic on a port can be mirrored to another port for analysis with a
network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can
be mirrored to single destination port. A single session is supported.OthersSingle IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable
diagnostics; ping; syslog; Telnet client (SSH secure support)Green Ethernet Green and Energy saving Ethernet (EEE)Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically
turns off power on Gigabit Ethernet RJ-45 port when detecting link down
or Idle of client. Active mode is resumed without loss of any packets when
the switch detects the link upCable length detectionAdjusts the signal strength based on the cable length. Reduces the power
consumption for cables shorter.General Jumbo framesFrame sizes up to 9KB supported on Gigabit interfacesMac tableUp to 8k Mac addressDiscovery Link Layer Discovery Protocol (LLDP)Used by network devices for advertising their identities, capabilities,
and neighbors on a IEEE 802 local area network, principally wired Ethernet.Min Requirements Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet
Explorer version 6 or later; Category 5 Ethernet network cable; TCP/IP,
network adapter, and network operating system (such as Microsoft Windows,
Linux, or Mac OS X) installed on each computer in networkDimensions165x145x45mmWorking EnvironmentOperating temperature: -40 to 75 ℃; Storage temperature: -40℃ to 75 ℃;
Operating humidity: 10% to 90% , relative, non-condensing
VLAN; 802.1Q tag based VLANIGMP v1/v2 snoopingIGM limits bandwidth intensive multicast traffic to only the requesters.
Support 1024 multicast groups (source-specific multicasting is not supported)POE standard /typeIEEE802.3af/at, END SPANMax POE Power per port15.4W per port (IEEE802.3af) & 30W per port (IEEE802.3at), total 4portsSecurity Secure Shell (SSH) ProtocolSSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supportedSecure Sockets Layer (SSL), HTTPSSSL encrypts the http traffic, allowing advance secure access to the browser-based
management GUI in the switchPort SecurityLocks MAC Addresses to ports, and limits the number of learned MAC addressesDHCP Snoopingprevent unauthorized configuration and use of IP addresses, while providing
support for IP Source Guard and ARP detectionIP Source GuardPrevents datagram with spoofed addresses from being in the networkARP InspectionPrevent ARP spoofing attacks and ARPStorm ControlPrevents traffic on a LAN from being disrupted by a broadcast, multicast,
or unicast storm on a portACLsSupport for up to 256 entries; Drop or rate limitation based on source
and destination MAC, VLAN ID or IP address, protocol, port, differentiated
services code point (DSCP) / IP precedence, TCP/ UDP source and destination
ports, 802.1p priority, Ethernet type, Internet Control Message Protocol
(ICMP) packets, IGMP packets, TCP flagQualtiy of Service HardwareSupport 8 hardware queuesScheduling8 COS queues per port support strict priority and weighted round-robin
(WRR)ClassificationsPort based; 802.1p(PCP) VLAN priority based;Rate LimitingIngress policer;egress shaping and rate control;per VLAN,per port and
flow basedManagement (Web/ SSL, Telnet/ SSH, ping,
Trivial File Transfer Protocol (TFTP), SNMP, Syslog)Web GUIBuilt-in switch configuration utility for browser-based device configuration
(HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and
monitoringDual ImageDual image provides independent primary and secondary OS files for backup
while upgradingFirmware upgradeWeb browser upgrade (HTTP/ HTTPs) and TFTP;??Upgrade through console port
as wellPort mirroringTraffic on a port can be mirrored to another port for analysis with a
network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can
be mirrored to single destination port. A single session is supported.OthersSingle IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable
diagnostics; ping; syslog; Telnet client (SSH secure support)Green Ethernet Green and Energy saving Ethernet (EEE)Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically
turns off power on Gigabit Ethernet RJ-45 port when detecting link down
or Idle of client. Active mode is resumed without loss of any packets when
the switch detects the link upCable length detectionAdjusts the signal strength based on the cable length. Reduces the power
consumption for cables shorter.General Jumbo framesFrame sizes up to 9KB supported on Gigabit interfacesMac tableUp to 8k Mac addressDiscovery Link Layer Discovery Protocol (LLDP)Used by network devices for advertising their identities, capabilities,
and neighbors on a IEEE 802 local area network, principally wired Ethernet.Min Requirements Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet
Explorer version 6 or later; Category 5 Ethernet network cable; TCP/IP,
network adapter, and network operating system (such as Microsoft Windows,
Linux, or Mac OS X) installed on each computer in networkDimensions165x145x45mmWorking EnvironmentOperating temperature: -40 to 75 ℃; Storage temperature: -40℃ to 75 ℃;
Operating humidity: 10% to 90% , relative, non-condensing
