When developers begin a new construction project, standard practice is hiring separate engineering firms to design mechanical, electrical and plumbing installations. However, this approach creates a substantial management challenge, since the developer should coordinate design groups in separate corporations, making certain that each one building systems interact properly.
There are equipment suppliers that provide design services, however, the system configurations out there are limited to the product providing of that specific supplier. the top goal of suppliers is to sell their equipment, and developers don’t have an opportunity to think about different solutions which will be a much better match for the project.
A simpler and smarter approach is functioning with an MEP engineering firm, that covers several areas of expertise. This way, developers will delegate not only the technical side of design but also team management. Building systems can't be designed in isolation, since they share physical areas and that they have elements that interact directly - as an example, many types of HVAC equipment are high-powered by electricity.
When building systems are designed by qualified MEP engineers, performance is increased and prices are optimized. For this reason, engineering will be considered an investment: it's a value like any skilled service, however, the advantages achieved are a lot of bigger.
|MEP Modeling - CAD Outsourcing|
For instance, MEP engineers will recommend energy efficiency measures to cut back the running value of building systems. within the case of a large building, these measures can save a lot of bucks over the service life of the property.
There are several aspects of building systems that may be optimized throughout the design process:
Equipment selection: Higher performance is achieved when instrumentation is adequate for the supposed application, and of the proper capability.
Mechanical, electrical and plumbing layout: A wise layout reduces the whole length of passage, piping, and ductwork. The installation may be completed with fewer materials and for a lower price.
Simplified maintenance: Skilled MEP engineers contemplate maintenance throughout the planning method, ensuring the installation is simple to access and service. Adequate instrumentation selection results in extended service life, reduced noise and vibration problems, and fewer frequent part replacements.
Enhancing the Design method with TechnologyConstruction drawings were once drafted by hand, a process that needed a high input of man-hours. Drafting was greatly simplified with the development of CAD design, permitting two-dimensional drawings in only a fraction of the time.
Modern design package relies on building information modeling, or BIM, wherever engineers will produce a three-dimensional model of the project with material and equipment properties. this permits increased visualization and planning of construction, and bills of materials will be calculated with automatic tools.
Advanced building models still be helpful even when the project is completed, since they will be used as a basis for building modifications and maintenance activities. The BIM file may be updated perpetually to trace the condition of equipment and elements, scheduling replacements well earlier.