Hacksaw Blade is one of the most useful metal cutting tool available with the manufacturers. With development in the manufacturing process, hacksaw blades have come a long way from where they have started. The raw material used to make hacksaw blade and the working condition determines the lifespan of the hacksaw blade. Since it is such a useful tool, it should be chosen after proper analysis. The right selection of hacksaw blade will improve your productivity and efficiency.
Tooth per inch (TPI) is one of the most important factor to be considered before making your decision to buy a hacksaw blade. TPI can influence the work process and work life of hacksaw blade. There are two kind of TPI blades, low and high. Listed below are the ways in which the number of TPI in your hacksaw can affect your work.
In case of Low TPI blade:-
If you will choose a blade having less number of TPI then the gap between its tooth will increase, making the tooth of the blade longer. Some of the most common properties which is found in a hacksaw blade with lower TPI are listed below.
1) It helps you to remove more materials in one stroke.
2) It is good to cut thicker materials.
3) It is advised not to use a lower TPI blade on a thin metal as the blade could be destroyed after getting hooked into the material.
4) It will be difficult to start the cutting process if the blade has lesser TPI. The tips are in contact with the metal for a longer time, creating more resistance while cutting.
5) It has been noted that lower TPI blades appear to be more useful for cutting larger material.
In case of High TPI blade:-
If you will choose a blade having large number of TPI then the gap between its tooth will decrease, making the tooth of the blade shorter. Some of the most common properties which is found in a hacksaw blade with higher TPI are listed below.
1) It has been noted that higher TPI blades appear to be more useful for cutting thin material.
2) There is less chance of hooking of tooth to the metal.
3) It is noted that higher TPI blades help in starting the cutting process easily. While cutting a thicker material, it is advised to start the process with a higher TPI blade and then start using a lower TPI blade for cutting the material at a faster rate.
4) The higher TPI blades will give you precise and clean cuts fitting your needs.
Right kind of material should be used to manufacture the metal tools to provide them durability. Bipico, is a leading manufacturer and exporter of high-quality metal cutting tools at the best price. They have a tradition of delivering the most strong anddurable metal cutting tools in the industry. Get the most affordable metal cutting tools from the most reliable cutting tool providers. We are here to make sure your work does not get affected due to lack of quality cutting tool.
