A Hacksaw is a fine-toothed saw Blade, mainly used for cutting metals. The height of the hacksaw blade is half-inch and the length of the blade is 12 inches. The blade contains a hole on its sides, which fits into pins on the blade.
What is Hacksaw Blade Used For?
The hacksaw blade is solely designed to cut metal, but still, you can cut anything with the hacksaw blade. The hacksaw blade can be used to cut,
- Aluminum
- Plastic
- Wood
- Brass
- Metal tubing
- Electrical tubing
- Plastic water pipe
- Nuts and Bolts
- Flexible metal tubing and more.
The only thing is that you should choose the right blade to cut the material. Different cutting materials demand different tooth Blades. If you want to cut bolt and nut, then you should choose the 18 tooth blade. A 32 tooth blade is the right choice for cutting electrical tubing.
Types of Hacksaw Blades
Hacksaw blades are classified into,
- Flexible Blades
This blade contains hardened steel on the teeth of the blade. The flexible metal sheet supports the blade. These blades are otherwise called as bimetal blades. These are blades are less breakable while comparing to other hard blades, so they are not prone to snapping.
- Hardened Blades
This blade is made of tempered high-grade steel. Both the teeth and backing of the blade is hardened. These blades can maintain their sharpness, but still, they are prone to breaking and brittle.
Hacksaw blade varies depending on its length. The length of the blade falls between 8 inches and 12 inches. Visit the right hacksaw blades manufacturer to buy the blades.
How to Maintain Your Hacksaw Blades?
If you want to prolong the life of your hacksaw blades, then you should continue reading the article further. The following points will let you know some tips to maintain your hacksaw blades.
1. Do the General Maintenance
You need to schedule regular maintenance. The wastes of the cutting materials may be collected on the cutting area and do not let the blade to work to the fullest.
2. Cut the Right Materials
Do not intend to cut any materials by hacksaw blade. Instead, you should consider which materials remain suitable to cut using the blade.
3. Examine the Parts
You need to check all the parts of the blade to ensure they are in a fair condition. This will help you address the issues sooner.
4. Cutting Standards
If you want to extend the life of your hacksaw blade, you need to know the cutting standards of the blade.
5. Secure Your Blades
Hacksaw blades are sharp and you need to take some measures to secure the teeth of the blades.
6. The Efficiency of the Blade
The blade would not cut all the materials at the same speed. The cutting speed and efficiency vary depending on the material. You should not speed up the cutting process manually.
7. Clean Your Blades
You should keep your blades clean to experience 100% efficiency.
Maintaining the hacksaw blades would be easy if you follow these tips.
