Question for you. My well water smells like rotten eggs. I don’t know what happened, it did not start to smell until recently. This summer its been very not and we started noticing rotten egg odor in our cold well water. Even sprinkling on the lawn leaves a bad smell around the house.
We have Iron (2.4 mg/L) and hardness 9 grains/gallon. I don’t know what our pH is, but it is around 7 to 7.5 I think. We use a water softener, and it works OK on the iron, but the bad odor is driving us crazy.
We have a little sediment, not bad, but I have to change the whole house Filter at least once a month.
What is the best way to deal with this type of smelly well water?
Thank you for emailing. One very effective low-cost way to treat water such as this is by using a Pro-Ox Air Charger in front of your existing water softener. This will eliminate hydrogen sulfide gas (rotten-egg odor) up to about 5 parts per million.
If the odors are severe you may need to do chlorination or Peroxide injection in addition to a Contact Tank.
The Air-Charger Iron Filter System is unique as doesn’t use any chemicals during the backwashing process. Instead, how it works is as the water passes through the air-pocket any Iron, Manganese, and Sulfur odors are oxidized for filtration by the Pro-Ox media.
Pro-OX Manganese Dioxide media is an NSF Certified natural high purity medium which utilizes an oxidation-reduction reaction and filtration process similar to Greensand but at a much higher level of performance. Pro-OX has a much higher surface area, is much more porous than Greensand, and also lasts much longer (usually 10 + years) compared to around 5 years maximum for Greensand and other filter medias.
We have an easy to follow guide on removing odors which details the various options, including using aeration, chlorination and hydrogen peroxide.
These systems are fully automatic and use the reliable 5900e control Valve for dependable filtration with minimal maintenance requirements along with being quite a user-friendly in operation.
One thing you can use is a low-cost optional Spindown filter which would be installed upstream of the Iron filter. This will protect against sand/sediment from entering the Control Valve and cause unwanted problems.
You can also use this to shock the filter/house with chlorine from time to time as will help with odor buildup as well as improving the filters cleanliness.
This uses a mesh screen thus no filter cartridges that need constant servicing. Simply flush the valve for 10 – 20 seconds as needed and done.
The following will show images, a brief description of each, system cost, warranty specifics, along with product links for more information. This is sized for a home with 3 – 3.5 bathrooms, however, smaller and larger sizes are available.
Pro-OX 5900-AIR 1.5 cu. Ft. - Air Injection Oxidizing Filter
Unique NSF Control Valve allows the air pocket to be replenished each night, without having the iron filter go through a complete backwash. Other Air-Charger Iron Filters must go through a complete backwash each night, in order to replenish the air, wasting thousands of gallons of water each year.
No potassium permanganate, or other chemicals required like other iron filters. This system also works with chlorinated water should you shock the well.
Dimensions: 10" diameter x 61" height with the valve attached. 1” connectors, media, valve, and a 9bypass is included. All installation and start-up guides will be sent directly to you and we are available for tech-support as well should you have questions during installation or down the line.
Excellent warranty: 10 years on the tank; Industry leading 7 years on the control valve.
Rusco Spin Down Filter, PE, 1”, 60 Mesh size
Rusco Spin Down Filter Polyester Screen T Style: 1" Pipe Size, 1" SxS Port (Slip x Slip, for PVC pipes or glued connections), 60 Mesh (254 Microns). Includes 1/2" manual flush ball valve. Rusco Spin-Down Sediment Filters are highly flexible filters designed to be utilized in a wide variety of applications.
Precision-24 Metering Pump with 15 Gallon Solution Tank
Extremely versatile pump comes in either 115 or 220 volts so as to be wired to come on whenever your well or pressure system is energized. Works with well water flow rates from 1 – 50 Gallons per Minute (GPM).
Output rating: 0.1 – 24 Gallons per Day (GPD). Pressure rating: Will inject into lines with up to 110 PSI. Digital speed adjustment allows for quick changes to pump output.
Additional features: Degassing Valve is built in which makes this great for chlorination use. The system includes Chlorination Pump, 15 Gallon Solution Tank, Injection Check Valve, tubing and installation fittings.
Excellent Warranty: 2 years on the Metering Pump,
Contact Retention Tank CWS – 1665, 48 Gallons
The CWS-1665 tank is a durable easy-to-install retention tank designed to provide optimum contact time during chemical treatment. These lightweight seamless totally non-corrosive retention tanks are ideal for new and replacement installation where durability is at a premium. 100% non-metallic polymer materials. Impervious to chemical attack.
Max Pressure: 125 PSI, most other tanks can take 75 PSI Maximum!
Dimensions: 16” Diameter x 74” Tall with Top Fitting.
System includes: 1” Ports.
Excellent Warranty: 5 years from date of installation.
For chlorination systems, a simple set up is to inject the chlorine before your pressure
I hope this information helps and finds you well, should you have any questions or require additional documentation simply let me know. Thanks again for contacting us to treat your water, I look forward to hearing from you.
Questions? Call us toll-free 888-600-5426 or email us!