Power Coating has emerged with innovative technologies, which can be integrated to enhance the performance of metal products and to provide advance safety to it. New and fine powder coating techniques are offered by companies such as Electrostatic spraying, Fluidized Bed, Hot/Flock spraying and Mini/Maxi coating.

• Electrostatic spraying – dvantage of this process is to provide close thickness control, tolerance for thin coating & can be re-used if it is over-sprayed.

• Fluidized bed – Coaters can perform external and internal coating in a single operation without any need of post curing. This also performs coating of parts which have complex geometry. The uniform coating thickness can be done along with limited power waste.

• Hot/Flock spraying – There’s no limitation in terms of part dimension and geometry & no need of post curing.

• Mini/Maxi coating – This process provides fast and easy coating of small parts in large number.

Economic & Emission-free Technique

Powder Coating provide solvent free and environment friend-ly economic solutions for coating metallic and thermally stable surfaces. Coated surface are resilient and suitable for industry applications.
Different type of coating can be used by consumers such as polyester coating, high-temperature silicon-polyester, epoxy, polyurethane coating and hybrid powder coating.

Heat Resistant Technique

It is a revolutionary process as compared to normal paints. A new type of coating technique is adopted by the industry which is generally applied on metal surface to create a hard finish.

• In this method the polymer granules are mixed with powdered pigments and ingredients to form a mixture.

• Then this mixture is heated in an extruder & is then cooled down.

• It is then rolled flat before breaking it into pieces.

• These pieces are grounded into fine powder.

• This powder is used to apply on the surface of the products such as : bumpers, engine parts, coil springs etc.

Powder coating is most commonly seen in application on metals, bikes and cars which allows the powder to form a solid film. For getting simple & high quality finish on the metal surface you can trust highly reputed Byers Bush Powder Coating Company. Since past many years it is successfully providing the most economical & satisfactory service to its clients in different Canada cities.