TricoCorp website and familiarize yourself with the oil services that they offer. They have a lab where they perform tests to analyze fluids such as oil, coolants, lubricants, fuels, etc. There are specific reasons for having an oil sample analysis performed on your equipment on a regular basis. You can also have lubricants (other than oil), fuels and coolants analyzed as well. Some of the reasons for having a specific oil analysis/testing schedule would be; it is a money saver program. It will save you money by letting you know various things about your equipment.
1- If the Oil Sample Analysis shows the oil is still in good shape, then it will not be recommended to be changed. Changing oil unnecessarily costs money and also creates more waste oil than necessary which also costs money to dispose of these days.
2- It will show if there are any metal particles in the system which means there is undo wear in your equipment. The analysis will indicate what type of metal is in the oil, which in turn gives the owner/operator an idea where to start looking for the problem. This can keep the operating costs and down time to a minimum.
3- Using the oil testing lab / laboratory / services can show if there is water in the system. Water can be very damaging to any equipment lubricated or driven by/with oil. It is especially hazardous to a hydraulic driven system. When there is water in the hydraulic oil it can cause inconsistent pressures in the system which can be dangerous, not only to the equipment, possibly causing damage to dies and/or tools, but to operators or any persons around the equipment.
4- The oil sample analysis can also tell if you are using filters with the correct microns for filtering the oil in your operating environment. If the microns are to big then you will be letting particles go through your system that could be damaging to the equipment. If the microns are to small they may restrict the oil/fluid flow too much and that can also be damaging to the equipment.
5- By performing the tests on the fluids and avoiding all of the above problems, money will also be saved on avoiding excessive down time.
When contacting your oil analysis lab / laboratory / services you will need information for them concerning the type of fluid you are going to have analyzed. Chances are it would be very helpful to them if you have the manufacturer’s name and code for the type of fluid being tested.
The bottom line is, oil analysis will always be worth the cost and little bit of time that it may take to perform the tests.
TricoCorp - Is one of the leading oil analysis service provider in a USA, We have an Oil Sample Analysis Laboratory where we perform tests such as Oil Sample Testing, coolants, lubricants, fuels testing etc. for more information please visit:- http://www.tricocorp.com
1- If the Oil Sample Analysis shows the oil is still in good shape, then it will not be recommended to be changed. Changing oil unnecessarily costs money and also creates more waste oil than necessary which also costs money to dispose of these days.
2- It will show if there are any metal particles in the system which means there is undo wear in your equipment. The analysis will indicate what type of metal is in the oil, which in turn gives the owner/operator an idea where to start looking for the problem. This can keep the operating costs and down time to a minimum.
3- Using the oil testing lab / laboratory / services can show if there is water in the system. Water can be very damaging to any equipment lubricated or driven by/with oil. It is especially hazardous to a hydraulic driven system. When there is water in the hydraulic oil it can cause inconsistent pressures in the system which can be dangerous, not only to the equipment, possibly causing damage to dies and/or tools, but to operators or any persons around the equipment.
4- The oil sample analysis can also tell if you are using filters with the correct microns for filtering the oil in your operating environment. If the microns are to big then you will be letting particles go through your system that could be damaging to the equipment. If the microns are to small they may restrict the oil/fluid flow too much and that can also be damaging to the equipment.
5- By performing the tests on the fluids and avoiding all of the above problems, money will also be saved on avoiding excessive down time.
When contacting your oil analysis lab / laboratory / services you will need information for them concerning the type of fluid you are going to have analyzed. Chances are it would be very helpful to them if you have the manufacturer’s name and code for the type of fluid being tested.
The bottom line is, oil analysis will always be worth the cost and little bit of time that it may take to perform the tests.
TricoCorp - Is one of the leading oil analysis service provider in a USA, We have an Oil Sample Analysis Laboratory where we perform tests such as Oil Sample Testing, coolants, lubricants, fuels testing etc. for more information please visit:- http://www.tricocorp.com
