A Faber Kitchen Chimney is a valuable addition to any kitchen, as it helps to keep the air clean and free from smoke, grease, and odours while cooking. Over time, however, the chimney can accumulate dirt, grease, and grime, affecting its performance. Regular cleaning is necessary to maintain the efficiency and longevity of your Faber kitchen chimney. Here in this blog, we will guide you through cleaning your Faber kitchen chimney at home, ensuring it functions optimally.

How to clean Faber Kitchen Chimney At Home:

It is hard to get better results with DIY Kitchen Cleaning methods. But you can still do it with the right equipment and cleaning solution. Before you begin cleaning your Faber kitchen chimney, make sure you have the following basic items on hand:

• Protective gear: Wear rubber gloves, an apron, and safety goggles to protect yourself from dirt, grime, and cleaning agents.
• Cleaning agents: You will need mild dish soap, warm water, baking soda, vinegar, and a degreaser specifically formulated for kitchen appliances.
• Tools: Gather a ladder or step stool, a soft cloth or sponge, a brush with soft bristles, a bucket, and a garbage bag.
• Accessories: Keep a pair of old newspapers or a drop cloth to protect the kitchen countertop and floor from any potential spills or splatters during cleaning.

Now that you have everything you need let’s move on to the step-by-step process to clean your Faber kitchen chimney.

Step-by-Step Process to Clean Faber Kitchen Chimney:

Here is the step-by-step process mentioned below about how to clean your Faber Kitchen Chimney at Home and get better results.

Internal Cleaning:

1. Turn off the chimney and unplug it from the power source. This ensures your safety while cleaning.
2. Cover the kitchen countertop and floor with old newspapers or a drop cloth to protect them from cleaning agents or debris.
3. Remove the outer panels of the chimney. Refer to the manufacturer’s instructions for guidance on detaching the panels safely. Place them aside.
4. Soak the removable metal filters in warm water mixed with mild dish soap for 15-20 minutes to loosen the grease and grime.
5. While the filters are soaking, prepare a cleaning solution by mixing warm water with a few drops of dish soap or a degreaser. Stir the mixture well.
6. Use a soft cloth or sponge dipped in the cleaning solution to wipe down the internal surfaces of the chimney. Pay special attention to areas with visible grease or dirt build-up. Gently scrub away the grime using a brush with soft bristles if needed.

External Cleaning:

After cleaning the internal surfaces, rinse the cloth or sponge thoroughly and wipe the chimney with clean water to remove any soap residue.

1. Remove the soaked filters from the water and gently scrub them with a brush to remove any remaining grease. Rinse them under running water until they are clean and free from soap.
2. Reattach the filters to the chimney once the filters are dry, per the manufacturer’s instructions. Ensure they are properly secured in place.
3. Clean the outer panels of the chimney with a damp cloth or sponge using the same cleaning solution. Wipe away dirt or grime and dry the panels thoroughly before reattaching them to the chimney.
4. Finally, plug the chimney back into the power source and turn it on to ensure it functions properly.

Regular cleaning of your Faber kitchen chimney, ideally once every three to six months, depending on usage, will help maintain its efficiency and prevent stubborn dirt and grease accumulation.

Cleaning your Faber kitchen chimney at home is a simple process that requires basic cleaning agents, tools, and protective gear. Following the steps outlined above, you can keep your chimney clean, ensuring it functions optimally and keeps the air in your kitchen fresh and odor-free.

FAQs For How to Clean Faber Kitchen Chimney At Home